I/O Magic MagicSpin manual Mscdex.Exe

Page 15

Note: DOS installation requires MSCDEX be present on your system. MSCDEX is included with DOS versions 6.0 and above. If you do not have MSCDEX, contact your computer reseller for assistance.

MSCDEX.EXE

MSCDEX.EXE is Microsoft’s CD Extension and is used to interface your PC to the CD-ROM drive. For the CD-ROM drive, MSCDEX.EXE version 2.21 or above is required.

During installation, a line is added to your AUTOEXEC.BAT that loads the MSCDEX.EXE driver. The entry in your AUTOEXEC.BAT will be something similar to:

C:\DOS\MSCDEX.EXE /D:MSCDD001 /V

The entry follows the format of:

[drive:\][path\]mscdex.exe /d:device_name [/l:letter] [/m:<number>]

Note: This line is not necessary if your are using your CD-ROM under Windows 98/95.

Image 15
Contents Magicspin Page Page Table of Contents Before You Begin Installation InstructionsIntroduction System RequirementsCD-ROM Technology Technical backgroundATA Packet Interface Atapi IDE/ATA InterfaceEnhanced IDE Interface CD-ROM Hardware Installation Prepare Your Computer for InstallationSetting Master or Slave Jumpers Connecting a Secondary IDE controller Connecting to a Primary IDE ControllerSlide the MagicSpin CD-ROM drive into the empty bay Connect the power supply cableMounting Your CD-ROM Drive Locate an available drive bayConnect the IDE interface cable Connect the Audio cable from your Sound Card If necessaryRe-attach the computer’s cover Enabling Ultra DMA/33 support under Windows 98/95 CD-ROM Software InstallationWindows 98/95 Installation Windows NT 3.5x InstallationPower on your PC and go to the Dos prompt Windows NT 4.0 InstallationDOS or Windows 3.1x Installation Click ADD and select IDE CD-ROM and click installMSCDEX.EXE CD Audio Installing CD AudioCare and Handling Using the CD-ROM DriveTroubleshooting CD-ROM TroubleshootingUse Registry Editor at your own risk Page Disc Appendix a CD-ROM General SpecificationsRegister Your I/OMagic Product Contacting I/OMagicDT-CD32A-001-981101