FEDERAL COMMUNICATIONS COMMISSION
WARNING: This equipment was tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions in this manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. For more information about radio frequency interference, refer to the section of this manual on Radio and TV interfer- ence.
CANADIAN REGULATIONS
This equipment is a Class A digital apparatus that complies with the Radio Interference Regulations, CRC c. 1374.
IMPORTANT: Changes or modifications to this product not authorized by GCC Technologies Inc. could void the FCC Certification and negate your authority to operate the product. This product was tested for FCC Compliance under conditions that included the use of shielded cables and connectors between system components. It is impor- tant that you use shielded cables and connectors to reduce the possibility of causing interference to radios, tele- vision sets, and other electronic devices. You can obtain the proper shielded cables from GCC Technologies or from an Authorized GCC Technologies dealer.
CLASS 1 LASER PRODUCT
LASER SAFETY: This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not emit hazardous radiation. Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 1, 1976. These reg- ulations apply to laser products marketed in the United States. The label on the printer indicates compliance with the CDRH regulations and must be attached to the laser products marketed in the United States.
Caution - Use of controls, adjustments, or performance of procedures other than those speci- fied in this manual may result in hazardous radiation exposure.
CREDITS
© Copyright GCC Technologies Inc., 2000. All rights reserved. The Elite 21 User Manual was written by David Nicholson.
It was edited by Donna Atwood, Kevin Curran, Donald Damon, Lee Doron, Laurie Freitas, Brian Harriss and Gregg Linzey.
Cover design by Adam DeFanti. Illustrations courtesy Xerox International Partners, Technical Services Group. Additional illustrations by Adam DeFanti, Bill Krech and Tracie King.
Printed in USA; part number