Freestyle Quartz Analog manual To USE the Chronograph STOP- Watch, To USE the Backlight

to any time outside it, then set the date and then reset to the correct time.

TO USE THE CHRONOGRAPH (STOP- WATCH):

1.Press S1 button to start counting.

2.To stop counting, press S1 button once. Press S1 button again to resume from where it left off.

3.To reset to zero, press S1 button to stop counting and then press S2 button.

TO USE THE BACKLIGHT:

Some watch models are equipped with an electroluminescence (EL) backlight. To turn on the backlight, press the backlight button.

If there is no separate backlight button, press the crown to activate the backlight.

SCREW-DOWN CROWN

Some watch models are equipped with a screw-down crown. Make sure to un- screw the crown before pulling out the crown for setting, then screw the crown back in tightly after setting to avoid any water entry.

ENGLISH

To reduce carbon foot print, these

Freestyle instructions are printed with

soy inks on recycled paper.