Award BIOS SETUP |
3-4 POWER MANAGEMENT SETUP
Choose the "POWER MANAGEMENT SETUP" in the CMOS SETUP UTILITY to display the following screen. This menu allows the user to modify the power management parameters and IRQ signals. In general, these parameters should not be changed unless it's absolutely necessary.
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management | : User Define | ** Power Down & Resume Events ** | ||||||||||
PM Control by APM | : Yes | IRQ3 |
| (COM 2) |
| : ON | ||||||
Video off Method | : V/H SYNC+Blank | IRQ4 |
| (COM 1) |
| : ON | ||||||
Modem Use IRQ | : 3 | IRQ5 |
| (LPT | 2) |
|
|
| : ON | |||
|
|
| IRQ6 |
| (Floppy Disk) |
| : ON | |||||
Doze Mode | : Disable | IRQ7 |
| (LPT | 1) |
|
|
| : OFF | |||
Standby | Mode | : Disable | IRQ8 |
| (RTC Alarm) |
| : OFF | |||||
Suspend | Mode | : Disable | IRQ9 |
| (IRQ2 | Redir) |
| : ON | ||||
HDD Power Down | : 15min | IRQ10 | (Reserved) |
| : ON | |||||||
|
|
| IRQ11 | (Reserved) |
| : ON | ||||||
** Wake Up Events In Doze & Standby ** | IRQ12 | (PS/2 Mouse) |
| : ON | ||||||||
IRQ3 | : ON | IRQ13 | (Coprocessor) |
| : ON | |||||||
IRQ4 | : ON | IRQ14 | (Hard Disk) |
| : ON | |||||||
IRQ8 | : ON | IRQ15 | (Reserved0 |
| : OFF | |||||||
IRQ12 | : ON |
|
|
|
|
|
|
|
|
|
| |
|
|
| Esc : Quit |
|
|
|
|
|
| : Select Item | ||
|
|
| F1 | : Help |
|
|
| |||||
|
|
| F5 | : Old Values | (Shift)F2 : Color | |||||||
|
|
| F7 : Load Setup Defaults |
|
|
|
|
Figure 3-5 POWER MANAGEMENT SETUP
Again, user can move the cursor by pressing direction keys to the field needed to be modified and press <PgDn> or <PgUp> to alter item selection. You can only change the content of Doze Mode, Standby Mode, and Suspend Mode when the Power Management is set to 'User Define'.
A.Power Management mode selection:
Disabled: The system operates in NORMAL conditions (Non- GREEN), and the Power Management function is disabled.
Max. saving: Maximum power savings. Inactivity period is 1 minute in each mode.
Min. saving: Minimum power savings. Inactivity period is 1 minute in each mode.
User define: Allow user to define PM Timers parameters to control power saving mode.
29