EPoX Computer KP6-FX2 manual Suspend Mode, HDD Standby Mode, Wake Up Events

Page 31
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved) IRQ12 (PS/2 Mouse) IRQ13 (Coprocessor) IRQ14 (Hard Disk) IRQ15 (Reserved)

Award BIOS SETUP

3-12

Standby Mode

When the system standby mode timer times-out, it will enter the standby mode and retain CPU at slow working speed. The screen will be blanked out.

Suspend Mode

When the system suspend timer times-out, the system will enter the suspend mode and the chipset will stop CPU clock immediately. The power consump- tion in Suspend Mode is lower than in standby mode. The screen is also blanked out.

HDD Standby Mode

When system stop reading or writing HDD, the timer starts to count. The system will cut off the HDD power when timer runs out of time. The system will not resume operation until either a read from or a write to HDD com- mand is executed again.

Wake Up Events

When the system is in Doze, suspend or Standby mode, you may disable activity monitoring of some common interrupt requests so they do not wake up the system.

The default wake-up event is keyboard activity. In these wake-up event fields, you can turn On or Off four commonly used interrupts. For example, if you have a modem on IRQ3, you can turn On IRQ3 as a wake-up event, so an interrupt from the modem can wake up the system. Or you may wish to turn Off IRQ12 (the PS/2) mouse as a wake-up event, so accidentally brushing the mouse does not awaken the system.

Power Down and Resume Events

You may disable monitoring of common interrupt requests so they do not reset activity timers.

IRQ3 (COM 2 )

IRQ4 (COM 1)

IRQ5 (LPT 2) IRQ6 (Floppy Disk) IRQ7 (LPT 1) IRQ8 (RTC Alarm)

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents 6 FX Modem Access Technical Support ServicesBios Upgrades Internet AccessUser Notice Handling ProceduresParts Checklist Table of Contents Appendixes Pentium II Processor Overview IntroductionPentium II Processor CPU with C. Cartridge 2 S.E.C. Cartridge Terminology 1 S.E.C. Cartridge OverviewKP6-FX 2 Specification KP6-FX 2 Form-Factor Overview Summary of ATX chassis featuresPower-On/Off Remote I/O Shield ConnectorSystem Block Diagram KP6-FX 2 Layout InstallationKP6-FX 2 Layout Power Saving LED indicator LED on when system is Connectors and JumpersCPU Clock Rate Select Essj JP5Connectors I/O Connectors Memory Configurations To enter Setup Program Award Bios SetupBios Features Setup Standard Cmos SetupBios Features Setup Award Bios Setup Typematic RateChars/Sec Choose the Chipset Features Setup in the Cmos Chipset Features SetupDram Read/Write Burst B/E/F The default value is x2/2/3 PCI Burst Write Combine CPU-To-PCI IDE Posting System Bios CacheableBit I/O Recovery Time The default value is CPU-To-PCI Write PostPower Management Setup Power Management SetupDescription of the Green Functions Power Down and Resume Events Standby ModeSuspend Mode HDD Standby ModePCI Configuration Setup PNP/PCI ConfigurationCombination of PCI INT# lines Integrated PeripheralsIDE Secondary Master PIO The default value is Auto Award Bios Setup Change Supervisor or User Password Load Setup DefaultsIDE HDD Auto Detection IDE HDD Auto DetectionLarge mode LBA Logical Block Addressing modeHDD LOW Level Format Save & Exit SetupExit Without Saving Address Range Size Description Appendix aMemory MAP MAPInterrupt MAP Time & DMA Channels MAPIRQ H/W RTC & Cmos RTC & Cmos RAM MAP01-02 Appendix BPost Codes POSThexProgram some of the Chipsets value according to Setup. Early Appendix Unexpected Errors Post hex Description Load Setup Default

KP6-FX2 specifications

The EPOX Computer KP6-FX2 is a notable motherboard from the late 1990s that garnered attention for its performance and versatility. Designed to support the AMD K6-2 and K6-III processors, the KP6-FX2 was particularly favored by enthusiasts looking to build cost-effective systems without sacrificing capabilities.

One of the standout features of the KP6-FX2 is its socket 7 architecture, which allowed compatibility with a broad range of processors. This flexibility provided users with options to upgrade over time, making it a long-term investment for many builders. The motherboard supports front-side bus speeds of 66/100 MHz, catering to varying performance needs and ensuring that users could benefit from enhanced processing power as new chips were released.

The KP6-FX2 supports up to 768 MB of SDRAM in three DIMM slots, another significant advantage during its time. The motherboard's ability to handle substantial memory was essential for users engaged in demanding applications or multitasking environments. Furthermore, it supports both single-sided and double-sided DIMMs, allowing for even more memory configuration options.

In terms of connectivity, the EPOX KP6-FX2 features an integrated VIA VT82C686B Southbridge, which provides an array of onboard features and I/O connectivity. Users could benefit from integrated PS/2 mouse and keyboard ports, as well as parallel and serial ports, giving them ample options for connecting peripherals. The onboard IDE controller supported up to four IDE devices, accommodating hard drives and optical drives, which was crucial for building a comprehensive system.

The motherboard also included AGP 2X support, which was advantageous for gamers and graphic designers looking to utilize 3D acceleration in their applications. With a dedicated AGP slot, users could install capable graphics cards that enhanced visual performance.

In summary, the EPOX Computer KP6-FX2 is remembered for its robust feature set and adaptability during a time when the PC industry was evolving rapidly. Its compatibility with socket 7 processors, support for substantial RAM, and integrated features made it a valuable choice for both casual users and tech enthusiasts alike. As a product of its era, the KP6-FX2 laid a foundation for future developments in motherboards, paving the way for more advanced technologies.
Top Page Image Contents