EPoX Computer KP6-FX2 manual Appendix a, Memory MAP, Map, Address Range Size Description

Page 40

Appendix

A1

			Appendix A:
A-1	MEMORY MAP
Address Range		Size	Description
[00000-7FFFF]		512K	Conventional memory
[80000-9FBFF]		127K	Extended Conventional memory
[9FC00-9FFFF]		1K	Extended BIOS data area if PS/2 mouse is installed
[A0000-C7FFF]		160K	Available for Hi DOS memory
[C8000-DFFFF]		96K	Available for Hi DOS memory and adapter ROMs
[E0000-EEFFF]		60K	Available for UMB
[EF000-EFFFF]		4K	Video service routine for Monochrome & CGA adaptor
[F0000-F7FFF]		32K	BIOS CMOS setup utility
[F8000-FCFFF]		20K	BIOS runtime service routine (2)
[FD000-FDFFF]		4K	Plug and Play ESCD data area
[FE000-FFFFF]		8K	BIOS runtime service routine (1)
A-2	I/O MAP
[000-01F]		DMA controller.(Master)
[020-021]		INTERRUPT CONTROLLER.(Master)
[022-023]		CHIPSET control registers. I/O ports.
[040-05F]		TIMER control registers.
[060-06F]		KEYBOARD interface controller.(8042)
[070-07F]		RTC ports & CMOS I/O ports.
[080-09F]		DMA register.
[0A0-0BF]		INTERRUPT controller.(Slave)
[0C0-0DF]		DMA controller.(Slave)
[0F0-0FF]		MATH COPROCESSOR.
[1F0-1F8 ]		HARD DISK controller.
[278-27F]		PARALLEL port 2.
[2B0-2DF]		GRAPHICS adapter controller.
[2F8-2FF]		SERIAL port 2.
[360-36F]		NETWORK ports.
[378-37F]		PARALLEL port 1.
[3B0-3BF]		MONOCHROME & PARALLEL port adapter.
[3C0-3CF]		EGA adapter.
[3D0-3DF]		CGA adapter.
[3F0-3F7]		FLOPPY DISK controller.
[3F8-3FF]		SERIAL port 1.

Image 40

Contents 6 FX Technical Support Services Bios UpgradesInternet Access Modem AccessHandling Procedures User NoticeParts Checklist Table of Contents Appendixes Pentium II Processor Overview IntroductionPentium II Processor CPU with C. Cartridge 1 S.E.C. Cartridge Overview 2 S.E.C. Cartridge TerminologyKP6-FX 2 Specification Summary of ATX chassis features KP6-FX 2 Form-Factor OverviewI/O Shield Connector Power-On/Off RemoteSystem Block Diagram Installation KP6-FX 2 LayoutKP6-FX 2 Layout Connectors and Jumpers Power Saving LED indicator LED on when system isJP5 CPU Clock Rate Select EssjConnectors I/O Connectors Memory Configurations Award Bios Setup To enter Setup ProgramStandard Cmos Setup Bios Features SetupBios Features Setup Award Bios Setup Typematic RateChars/Sec Chipset Features Setup Choose the Chipset Features Setup in the CmosDram Read/Write Burst B/E/F The default value is x2/2/3 PCI Burst Write Combine System Bios Cacheable Bit I/O Recovery Time The default value isCPU-To-PCI Write Post CPU-To-PCI IDE PostingPower Management Setup Power Management SetupDescription of the Green Functions Standby Mode Suspend ModeHDD Standby Mode Power Down and Resume EventsPNP/PCI Configuration PCI Configuration SetupIntegrated Peripherals Combination of PCI INT# linesIDE Secondary Master PIO The default value is Auto Award Bios Setup Load Setup Defaults Change Supervisor or User Password IDE HDD Auto Detection IDE HDD Auto DetectionLBA Logical Block Addressing mode Large modeHDD LOW Level Format Save & Exit SetupExit Without Saving Appendix a Memory MAPMAP Address Range Size DescriptionInterrupt MAP Time & DMA Channels MAPIRQ H/W RTC & Cmos RAM MAP RTC & CmosAppendix B Post CodesPOSThex 01-02Program some of the Chipsets value according to Setup. Early Appendix Unexpected Errors Post hex Description Load Setup Default