Directed Electronics manual Model K10, installation guide

Page 1

Model K10

installation guide

NOTE: This product is intended for installation by a professional installer only! Any attempt to install this product by any person other than a trained professional may result in severe damage to a vehicle’s electrical system and components.

Image 1

Contents Model K10 installation guidedoor lock harness H4, wire connection guide table of contentsmodule programming system features menus feature descriptions power-up wiring quick reference guideprimary harness H1 wiring diagram primary harness H1 wire connection guideprimary harness wire descriptions H1/1 ORANGE - Ground-When-Armed OutputH1/3 WHITE/BLUE - Channel 3 Output H1/2 WHITE - Parking Light OutputH1/4 BLACK/WHITE - 200 mA Domelight Supervision Output H1/8 BLACK - Chassis Ground Connection H1/6 BLUE - 200 mA Second Unlock OutputH1/9 YELLOW + Ignition Input H1/10 BROWN - Horn Honk OutputH1/12 RED/WHITE channel 2, 200mA - output H1/11 RED +12V constant power inputoverride switch, 2-pin BLUE plug door lock harness H4, wire connection guideperipheral plug-in harnesses LED, 2-pin WHITE plugPro Security Programmer interface, 3-pin port module programmingTo enter the learn routine The Override switch is pressed too many times 4. Release. The Override switch can now be releasedThe learn routine will be exited if The ignition is turned on More than 15 seconds elapses between programming stepsfeature descriptions system features menusremote coding Function standard configuration remote configurationssingle button arm/disarm configuration power-up Pro Security Programmer Override Switch 3-Pin 2-Wire Door wiring quick reference guideLock Harness 800-GO-CLARION Ungo Pro Security 661 W. Redondo Beach Blvd Gardena, CaGet Started Get Protected 2003 Directed Electronics, Inc. - All rights reserved GK10