![](/images/new-backgrounds/1121127/12112729x1.webp)
Enabling Web Management
The HTTP Configuration menu is used to enable or disable the ability to manage the switch with Web management. The HTTP Server parameter must be set to ENABLED before Digital Networks WebView can be used to manage the switch. If it is desired to disallow Web management of the switch, this parameter should be set to DISABLED
1.Starting at the Main Menu of the console user interface, select Management Setup Menu / Network Configuration / HTTP Configuration.
2.Select HTTP Server, and use the Space bar to toggle between ENABLED and DISABLED.
Starting and Stopping Digital Networks WebView
Do the following to use Digital Networks WebView:
1.Start a
2.Enter the IP address for the switch you want to manage in the URL field of the browser.
3.The screen shown below will appear, prompting you to enter the user name and password for management access.
Use the name for the default administrator (admin), and the password previously entered in the Setting Up Web Management section. This will allow read/write access to the switch.
The full application will now launch. A
4.To stop Digital Networks WebView, close the Web browser application.
DNswitch 800 | Using |