Digital Networks North America DNswitch 800 manual Address Table Configuration

Address Table Configuration

The Address Table contains the unicast MAC addresses and VLAN identifier associated with each port (that is, the source port associated with the address and VLAN), sorted by MAC address or VLAN. You can also clear the entire address table, or information associated with a specific address; or set the aging time for deleting inactive entries. The information displayed in the Address Table is indicated in the following figure and table.

	Figure 3-12. Address Table
Parameter	Description
Aging Time	Time-out period in seconds for aging out dynamically learned
	forwarding information.
	Range: 10 - 415 secs; default: 300 secs.
Dynamic Address	The number of dynamically learned addresses currently in the
Counts	table.
Static Address	The number of static addresses currently in the table.
Counts
Address Table	All entries, sorted by address or VLAN ID.
Address Table Sort	The system displays the MAC address of each node and port
Key	whose address table includes this MAC address, the
	associated VLAN(s), and the address status (i.e., dynamic or
	static).
New Static Address	Use these fields to add or remove a static entry to the address
	table. Indicate the address, port and VLAN group when adding
	a new entry.
Add/Remove	Adds/removes selected address.
Clear Table	Removes all addresses from the address table.

DNswitch 800 Configuring and Monitoring the Switch 19