Dell H710P Multiple Disks Become Inaccessible, Rebuilding a Failed Physical Disk, Virtual disk

Page 80

Multiple Disks Become Inaccessible

Issue:

Rebuilding the physical disks after multiple disks become simultaneously inaccessible.

Corrective

Multiple physical disk errors in a single array typically indicate a failure in cabling or

Action:

connection and could involve the loss of data. You can recover the virtual disk after multiple

 

physical disks become simultaneously inaccessible. Perform the following steps to recover the

 

virtual disk:

CAUTION: Follow the safety precautions to prevent electrostatic discharge.

1.Turn off the system, check cable connections, and reseat physical disks.

2.Ensure that all the disks are present in the enclosure.

3.Turn on the system and enter the BIOS Configuration Utility (<Ctrl> <R>) utility.

4.Import the foreign configuration.

5.Press <F> at the prompt to import the configuration, or press <C> to enter the BIOS Configuration Utility (<Ctrl> <R>) and either import or clear the foreign configuration.

If the virtual disk is redundant and transitioned to Degraded state before going Offline, a rebuild operation starts automatically after the configuration is imported. If the virtual disk has gone directly to the Offline state due to a cable pull or power loss situation, the virtual disk is imported in its Optimal state without a rebuild occurring.

NOTE: You can use the BIOS Configuration Utility (<Ctrl> <R>) or Dell OpenManage storage management application to perform a manual rebuild of multiple physical disks. For information on rebuilding a single physical disk, see the topic Performing A Manual Rebuild Of An Individual Physical Disk.

Rebuilding A Failed Physical Disk

Issue:

Rebuilding a physical disk after one of them is in a failed state.

Corrective

If you have configured hot spares, the PERC card automatically tries to use one of them to

Action:

rebuild a physical disk that is in a failed state. Manual rebuild is necessary if no hot spares with

 

enough capacity to rebuild the failed physical disks are available. You must insert a physical

 

disk with enough storage in the subsystem before rebuilding the physical disk.

NOTE: You can use the BIOS Configuration Utility (<Ctrl> <R>) or Dell OpenManage storage management application to perform a manual rebuild of an individual physical disk. For information on rebuilding a single physical disk, see the topic Performing A Manual Rebuild Of An Individual Physical Disk.

Virtual Disk Fails During Rebuild Using A Global Hot Spare

Issue:

A virtual disk fails during rebuild while using a global hot spare.

Description: The global hot spare goes back to Hotspare state and the virtual disk goes to Failed state.

Virtual Disk Fails During Rebuild Using A Dedicated Hot Spare

Issue:

A virtual disk fails during rebuild while using a dedicated hot spare.

Description: The dedicated hot spare goes to Ready state and the virtual disk goes to Failed state.

80

Image 80
Contents H710P, and H810 User’s Guide Dell Inc. All Rights Reserved Contents Driver Installation Deploying The Perc CardSupport For Internal Multiple Controllers Management Applications For Perc CardsCacheCade Security Key And RAID Management Security Key Management In The Bios Configuration UtilityTroubleshooting Appendix RAID Description Multiple Disks Become InaccessibleSource Disk Fails During Replace Member Operation Disk Mirroring Specification H310 H710 H710P OverviewSpecification H310 H710 H710P H810 Supported Operating SystemsGetting Help Spans per Disk GroupDocumentation Feedback Contacting DellRelated Documentation Page Features Physical Disk Power ManagementConfigured Spin Down Delay There are four power saving modes availableTypes Of Virtual Disk Initialization Consistency ChecksBackground Initialization Of Virtual Disks Full Initialization Of Virtual DisksUsing Disk Roaming Configuring FastPath-Capable Virtual DisksDisk Roaming FastPathVirtual Disk Migration Migrating Virtual DisksRead WriteConditions Under Which Write-Back Is Employed Virtual Disk Write Cache PoliciesWrite-Back And Write-Through Reconfiguration Of Virtual Disks Virtual Disk Read Cache PoliciesSource RAID Number Capacity Description LevelDisk into a Mirrored virtualDisk by adding One diskFault Tolerance Smart FeatureAutomatic Replace Member With Predicted Failure Reclaims diskPatrol Read Redundant Path Support For Perc H810 OnlyUsing Persistent Hot Spare Slots Using Replace Member And Revertible Hot SparesPhysical Disk Failure Detection Physical Disk Hot SwappingBattery Transparent Learn Cycle Controller Cache PreservationPage Deploying The Perc Card Removing The Perc ControllerPCIe slot SAS cable connectors Perc adapter Screw Removing and Installing the Perc AdapterInstalling The Perc Controller Removing and Installing the Perc Mini Monolithic ControllerSetting Up Redundant Path Support On The Perc H810 Adapter Support For Internal Multiple ControllersRedundant Path Support Configuration With Two Enclosures Server StoragePage Click Continue Driver InstallationInstalling a driver Popular support tools section, click Drivers and Downloads Reboot the system when prompted Select Install from a list or specific locationUpdating The Linux Driver Click on the Hardware tabUpgrading The Kernel Version installed Page Bios Configuration Utility Entering The Bios Configuration UtilityManagement Applications For Perc Cards Dell OpenManage Storage ManagementExiting The Configuration Utility To exit the Bios Configuration Utility Ctrl RMenu Navigation Controls Notation Meaning and Use ExampleSetting Up Virtual Disks Notation Meaning and UseCtrl Mgmt, and Foreign View Mgmt, Ctrl Mgmt, and Foreign ViewParameter Description Summary Of RAID LevelsVirtual Disk Management Creating Virtual DisksParameterDescription Select Create New VD and press EnterSelecting Virtual Disk Parameters Converting Physical Disk To RAID Capable For Perc H310Converting Physical Disk To Non-RAID For Perc H310 Initializing Virtual DisksChecking Data Consistency Running a Data Consistency CheckPage Page Choose Break Mirror and press Enter Break MirrorManaging Preserved Cache Select Manage Ded. HS and press Enter Managing Dedicated Hot SparesSelect Manage Preserved Cache Clearing The Configuration Select Clear ConfigDeleting Virtual Disks Deleting Disk GroupsVirtual Disks Physical Disks Bios Configuration Utility Menu OptionsVirtual Disk Management VD Mgmt Security property of the Disk Group Virtual Disks Virtual Disk Actions Action DescriptionPhysical Disk Management PD Mgmt Physical Disk ActionsController Management Actions RebuildController Management Ctrl Mgmt Physical Disk Management Foreign Configuration ViewSetting LED Blinking Replacing An Online Physical Disk Creating Global Hot SparesRemoving Global Or Dedicated Hot Spares Performing a Manual Rebuild Of An Individual Physical Disk Restrictions and LimitationsStopping Background Initialization Enabling Boot Support Enabling Boot Support For a BIOS-Enabled ControllerEnabling Bios Stop On Error Controller ManagementUefi RAID Configuration Utility Restoring Factory Default SettingsEntering The Uefi RAID Configuration Utility Disabling Auto ImportExiting The Uefi RAID Configuration Utility Configuration OptionsDevice Settings menu Controller Management MenuEnclosure Management Virtual Disk ManagementPhysical Disk Management Menu CacheCade CacheCade Virtual Disk CharacteristicsConfiguring And Managing CacheCade Virtual Disks Select Create CacheCade Virtual Disk and press Enter CacheCade Virtual Disk ManagementCreating CacheCade Virtual Disks Reconfiguring CacheCade Virtual Disks Automatic Reconfiguration Of CacheCade Virtual DisksDeleting CacheCade Virtual Disks Manual Resizing Of CacheCade Virtual DisksPage Security Key Management In The Bios Configuration Utility Security Key And RAID ManagementSecurity Key Implementation Local Key Management LKMCreating a Security Key Changing The Security KeySecuring Pre-Existing Virtual Disks Deleting a Security KeyCreating Secured Virtual Disks Highlight the Secure Disk Group option and press Enter Instant Secure Erase Troubleshooting Security Key ErrorsSecured Foreign Import Errors Failure To Delete Security Key Failure To Instant Secure Erase Task On Physical DisksTroubleshooting Bios Error MessagesDiscovery Error Message Extra Enclosure Error MessageMissing Virtual Disks Error Message Missing Disks In Virtual Disk Error MessagePrevious Configuration Of Disks Removed Error Message Drive Configuration Changes Error Message Dirty Cache Data Error MessageBios Disabled Error Message Adapter At Baseport Not Responding Error Message Virtual Disks Offline Error MessageVirtual Disks Degraded Error Message Action Cable problems, press any key or Y to continueVirtual Disks Partially Degraded Error Message Memory Or Battery Problem Error MessageFirmware Fault State Error Message Foreign Configuration Found Error MessageForeign Configuration Not Found In Ctrl R Error Message Previous Configuration Cleared Or Missing Error MessageInvalid SAS Topology Detected Error Message Multibit ECC Errors Detected Error MessagesDegraded State Of Virtual Disks Configured Disks Removed Or Not Accessible Error MessageBattery Discharged Or Disconnected Error Message Memory Errors General IssuesPreserved Cache State Perc Card Has Yellow Bang In Device ManagerPhysical Disk Issues Unable to Rebuild a Fault Tolerant Virtual DiskFatal Error Or Data Corruption Reported Physical Disk In Failed StateMultiple Disks Become Inaccessible Virtual Disk Fails During Rebuild Using a Global Hot SpareRebuilding a Failed Physical Disk Virtual diskPhysical Disk Takes a Long Time To Rebuild Smart ErrorsVirtual Disk Fails Rebuild Using a Dedicated Hot Spare Replace Member Errors Linux Operating System ErrorsIssue General disk fails Corrective ErrorUnable To Register Scsi Device Error Message Install a DKMS-enabled driver packageReboot to the new kernel Driver Does Not Auto-Build Into New KernelDisk Carrier LED Indicators Activity LED Status LEDAppendix RAID Description Summary Of RAID LevelsRAID Terminology Disk StripingParity Data Disk MirroringSpanned RAID Levels Example of Distributed Parity RAID
Related manuals
Manual 136 pages 19.9 Kb

H310, H710, H710P, H810 specifications

Dell offers a range of storage controller technologies, notably the H810, H710, H710P, and H310, which cater to different enterprise needs. These controllers are designed to support various storage configurations, enhancing overall system performance and reliability.

The Dell H810 is a high-performance PCIe 3.0 RAID controller that supports up to eight internal drives and is particularly suited for demanding workloads. It features advanced RAID levels including RAID 0, 1, 5, 6, 10, 50, and 60, providing flexibility for various data protection strategies. The H810 also supports up to 32TB of storage capacity, making it suitable for environments that require substantial data management capabilities.

The H710 is another powerful RAID controller, widely recognized for its balance of performance and cost-efficiency. It features 1GB of cache memory, which aids in accelerating read and write operations. The H710 supports the same RAID levels as the H810 and allows for up to 512MB of non-volatile memory. This ensures data integrity even in the event of a power failure, making it reliable for critical applications.

The H710P is an enhanced version of the H710, with a significant upgrade in its cache capabilities. It offers 2GB of battery-backed cache memory, further enhancing data processing speeds and improving responsiveness. The H710P is ideal for intensive workloads and virtualization, where rapid access to data is essential. This controller also includes features such as RAID storage pooling, intelligent data tiering, and support for multiple virtual disks.

Finally, the H310 is a cost-effective option for small to medium-sized businesses or those with less demanding storage requirements. It offers similar RAID support as the higher-end controllers but operates with a simpler architecture. The H310 features 512MB of cache, providing sufficient performance for regular workloads without the additional complexities of more advanced controllers.

In summary, Dell's H810, H710, H710P, and H310 storage controllers each serve distinct purposes, providing various features, technologies, and performance characteristics tailored to different business needs. From high-capacity storage solutions to user-friendly setups, Dell’s offerings ensure that organizations can efficiently manage their data storage requirements.