Dell H310, H710P, H810 manual Smart Errors, Virtual Disk Fails Rebuild Using a Dedicated Hot Spare

Page 81

Physical Disk Fails During Reconstruction On Redundant Virtual Disk

Issue:

A physical disk fails during a reconstruction process on a redundant virtual disk that has a hot

 

spare.

Corrective

The dedicated hot spare goes to Ready state and the virtual disk goes to Failed state.

Action:

 

Virtual Disk Fails Rebuild Using A Dedicated Hot Spare

Issue:

A virtual disk fails during rebuild while using a dedicated hot spare.

Description:

The dedicated hot spare goes to Ready state and the virtual disk goes to Failed state.

Physical Disk Takes A Long Time To Rebuild

Issue:

A physical disk is taking longer than expected to rebuild.

Description: A physical disk takes longer to rebuild when under high stress. For example, there is one rebuild I/O operation for every five host I/O operations. You cannot add a second virtual disk to a disk group while the virtual disk in that disk group is undergoing a rebuild. The firmware does not allow you to create a virtual disk using the free space available in a disk group if a physical disk in a virtual disk group is undergoing a rebuild operation.

SMART Errors

SMART monitors the internal performance of all motors, heads, and physical disk electronics and detects predictable physical disk failures.

NOTE: For information about where to find reports of SMART errors that could indicate hardware failure, see the Dell OpenManage storage management documentation at dell.com/support/manuals.

Smart Error Detected On A Physical Disk In A Redundant Virtual Disk

Issue:

A SMART error is detected on a physical disk in a redundant virtual disk.

Corrective

Perform the following steps:

Action:

1.

Back up your data.

 

 

2.

Force the physical disk offline.

NOTE: If a hot spare is present, the rebuild starts with the hot spare after the disk is forced offline.

3.Replace the disk with a new physical disk of equal or higher capacity.

4.Perform the Replace Member operation.

NOTE: The Replace Member operation allows you to copy data from a source physical disk of a virtual disk to a target physical disk that is not a part of the virtual disk. For more information about the Replace Member feature, see the topic Using Replace Member And Revertible Hot Spares.

81

Page 80 Page 82
Image 81
Page 80 Page 82
Contents H710P, and H810 User’s Guide Dell Inc. All Rights Reserved Contents Deploying The Perc Card Driver InstallationSupport For Internal Multiple Controllers Management Applications For Perc CardsCacheCade Security Key Management In The Bios Configuration Utility TroubleshootingSecurity Key And RAID Management Multiple Disks Become Inaccessible Source Disk Fails During Replace Member OperationAppendix RAID Description Disk Mirroring Overview Specification H310 H710 H710PSupported Operating Systems Specification H310 H710 H710P H810Getting Help Spans per Disk GroupContacting Dell Related DocumentationDocumentation Feedback Page Physical Disk Power Management FeaturesConfigured Spin Down Delay There are four power saving modes availableConsistency Checks Types Of Virtual Disk InitializationBackground Initialization Of Virtual Disks Full Initialization Of Virtual DisksConfiguring FastPath-Capable Virtual Disks Using Disk RoamingDisk Roaming FastPathMigrating Virtual Disks Virtual Disk MigrationRead WriteVirtual Disk Write Cache Policies Write-Back And Write-ThroughConditions Under Which Write-Back Is Employed Virtual Disk Read Cache Policies Reconfiguration Of Virtual DisksSource RAID Number Capacity Description LevelMirrored virtual Disk into aDisk by adding One diskSmart Feature Fault ToleranceAutomatic Replace Member With Predicted Failure Reclaims diskRedundant Path Support For Perc H810 Only Patrol ReadUsing Replace Member And Revertible Hot Spares Using Persistent Hot Spare SlotsPhysical Disk Failure Detection Physical Disk Hot SwappingController Cache Preservation Battery Transparent Learn CyclePage Removing The Perc Controller Deploying The Perc CardRemoving and Installing the Perc Adapter PCIe slot SAS cable connectors Perc adapter ScrewRemoving and Installing the Perc Mini Monolithic Controller Installing The Perc ControllerSupport For Internal Multiple Controllers Setting Up Redundant Path Support On The Perc H810 AdapterServer Storage Redundant Path Support Configuration With Two EnclosuresPage Driver Installation Installing a driverClick Continue Popular support tools section, click Drivers and Downloads Select Install from a list or specific location Reboot the system when promptedUpdating The Linux Driver Click on the Hardware tabUpgrading The Kernel Version installed Page Entering The Bios Configuration Utility Bios Configuration UtilityManagement Applications For Perc Cards Dell OpenManage Storage ManagementTo exit the Bios Configuration Utility Ctrl R Exiting The Configuration UtilityMenu Navigation Controls Notation Meaning and Use ExampleNotation Meaning and Use Setting Up Virtual DisksCtrl Mgmt, and Foreign View Mgmt, Ctrl Mgmt, and Foreign ViewSummary Of RAID Levels Parameter DescriptionCreating Virtual Disks Virtual Disk ManagementParameterDescription Select Create New VD and press EnterConverting Physical Disk To RAID Capable For Perc H310 Selecting Virtual Disk ParametersInitializing Virtual Disks Converting Physical Disk To Non-RAID For Perc H310Checking Data Consistency Running a Data Consistency CheckPage Page Break Mirror Managing Preserved CacheChoose Break Mirror and press Enter Managing Dedicated Hot Spares Select Manage Preserved CacheSelect Manage Ded. HS and press Enter Select Clear Config Clearing The ConfigurationDeleting Virtual Disks Deleting Disk GroupsBios Configuration Utility Menu Options Virtual Disk Management VD MgmtVirtual Disks Physical Disks Security property of the Disk Group Virtual Disks Action Description Virtual Disk ActionsPhysical Disk Actions Physical Disk Management PD MgmtRebuild Controller Management Ctrl MgmtController Management Actions Foreign Configuration View Setting LED BlinkingPhysical Disk Management Creating Global Hot Spares Removing Global Or Dedicated Hot SparesReplacing An Online Physical Disk Restrictions and Limitations Stopping Background InitializationPerforming a Manual Rebuild Of An Individual Physical Disk Enabling Boot Support For a BIOS-Enabled Controller Enabling Boot SupportEnabling Bios Stop On Error Controller ManagementRestoring Factory Default Settings Uefi RAID Configuration UtilityEntering The Uefi RAID Configuration Utility Disabling Auto ImportConfiguration Options Exiting The Uefi RAID Configuration UtilityDevice Settings menu Controller Management MenuVirtual Disk Management Physical Disk Management MenuEnclosure Management CacheCade Virtual Disk Characteristics Configuring And Managing CacheCade Virtual DisksCacheCade CacheCade Virtual Disk Management Creating CacheCade Virtual DisksSelect Create CacheCade Virtual Disk and press Enter Automatic Reconfiguration Of CacheCade Virtual Disks Reconfiguring CacheCade Virtual DisksDeleting CacheCade Virtual Disks Manual Resizing Of CacheCade Virtual DisksPage Security Key And RAID Management Security Key Management In The Bios Configuration UtilitySecurity Key Implementation Local Key Management LKMChanging The Security Key Creating a Security KeyDeleting a Security Key Creating Secured Virtual DisksSecuring Pre-Existing Virtual Disks Highlight the Secure Disk Group option and press Enter Troubleshooting Security Key Errors Secured Foreign Import ErrorsInstant Secure Erase Failure To Instant Secure Erase Task On Physical Disks Failure To Delete Security KeyBios Error Messages TroubleshootingDiscovery Error Message Extra Enclosure Error MessageMissing Disks In Virtual Disk Error Message Previous Configuration Of Disks Removed Error MessageMissing Virtual Disks Error Message Dirty Cache Data Error Message Bios Disabled Error MessageDrive Configuration Changes Error Message Virtual Disks Offline Error Message Adapter At Baseport Not Responding Error MessageVirtual Disks Degraded Error Message Action Cable problems, press any key or Y to continueMemory Or Battery Problem Error Message Virtual Disks Partially Degraded Error MessageFirmware Fault State Error Message Foreign Configuration Found Error MessagePrevious Configuration Cleared Or Missing Error Message Foreign Configuration Not Found In Ctrl R Error MessageInvalid SAS Topology Detected Error Message Multibit ECC Errors Detected Error MessagesConfigured Disks Removed Or Not Accessible Error Message Battery Discharged Or Disconnected Error MessageDegraded State Of Virtual Disks General Issues Memory ErrorsPreserved Cache State Perc Card Has Yellow Bang In Device ManagerUnable to Rebuild a Fault Tolerant Virtual Disk Physical Disk IssuesFatal Error Or Data Corruption Reported Physical Disk In Failed StateVirtual Disk Fails During Rebuild Using a Global Hot Spare Multiple Disks Become InaccessibleRebuilding a Failed Physical Disk Virtual diskSmart Errors Virtual Disk Fails Rebuild Using a Dedicated Hot SparePhysical Disk Takes a Long Time To Rebuild Linux Operating System Errors Replace Member ErrorsIssue General disk fails Corrective ErrorInstall a DKMS-enabled driver package Unable To Register Scsi Device Error MessageReboot to the new kernel Driver Does Not Auto-Build Into New KernelActivity LED Status LED Disk Carrier LED IndicatorsSummary Of RAID Levels Appendix RAID DescriptionRAID Terminology Disk StripingDisk Mirroring Spanned RAID LevelsParity Data Example of Distributed Parity RAID
Related manuals
Manual 136 pages 19.9 Kb

H310, H710, H710P, H810 specifications

Dell offers a range of storage controller technologies, notably the H810, H710, H710P, and H310, which cater to different enterprise needs. These controllers are designed to support various storage configurations, enhancing overall system performance and reliability.

The Dell H810 is a high-performance PCIe 3.0 RAID controller that supports up to eight internal drives and is particularly suited for demanding workloads. It features advanced RAID levels including RAID 0, 1, 5, 6, 10, 50, and 60, providing flexibility for various data protection strategies. The H810 also supports up to 32TB of storage capacity, making it suitable for environments that require substantial data management capabilities.

The H710 is another powerful RAID controller, widely recognized for its balance of performance and cost-efficiency. It features 1GB of cache memory, which aids in accelerating read and write operations. The H710 supports the same RAID levels as the H810 and allows for up to 512MB of non-volatile memory. This ensures data integrity even in the event of a power failure, making it reliable for critical applications.

The H710P is an enhanced version of the H710, with a significant upgrade in its cache capabilities. It offers 2GB of battery-backed cache memory, further enhancing data processing speeds and improving responsiveness. The H710P is ideal for intensive workloads and virtualization, where rapid access to data is essential. This controller also includes features such as RAID storage pooling, intelligent data tiering, and support for multiple virtual disks.

Finally, the H310 is a cost-effective option for small to medium-sized businesses or those with less demanding storage requirements. It offers similar RAID support as the higher-end controllers but operates with a simpler architecture. The H310 features 512MB of cache, providing sufficient performance for regular workloads without the additional complexities of more advanced controllers.

In summary, Dell's H810, H710, H710P, and H310 storage controllers each serve distinct purposes, providing various features, technologies, and performance characteristics tailored to different business needs. From high-capacity storage solutions to user-friendly setups, Dell’s offerings ensure that organizations can efficiently manage their data storage requirements.
Top Page Image Contents