Dell M1000E owner manual Avocent iKVM Analog Switch Module Optional

Page 17

Avocent iKVM Analog Switch Module (Optional)

Figure 11. Avocent iKVM Switch Module

1.status/identification indicator

2.power indicator

3.link indicator

CAUTION: Do not connect the ACI port to a LAN device such as a network hub. Doing so may result in equipment damage.

4.Analog Console Interface (ACI) port (for tiering connection only)

5.activity indicator

6.USB connectors (2) for keyboard and mouse

7.video connector

Avocent Analog iKVM Switch Module Indicators

Module Indicator

Power indicator

Status/Identification indicator

USB connectors

Description

 

Off

iKVM switch does not have power.

Green

iKVM switch has power.

Green flashing

Firmware upgrade in progress.

Blue blinking

iKVM module is being identified.

Amber flashing

System fault or error condition.

Allows a keyboard and mouse to be connected to the system.

17

Image 17
Contents Regulatory Model BMX01 Dell Inc. All Rights Reserved Contents General I/O Module Configuration Guidelines Configuring The I/O ModulesModules-Pass-Through Installing Enclosure ComponentsGetting Help Troubleshooting The EnclosureTechnical Specifications System Overview About Your SystemBlade Numbering Full Height Blades Control-Panel Features System Control-Panel FeaturesLCD Module LCD Display LCD Module FeaturesUsing The LCD Module Menus Configuration WizardKeyAction Left and right arrows Move between screens Center buttonBack-Panel Features Back-Panel FeaturesBack-Panel Module Bay Numbering Power Supply IndicatorsPower supply fault indicator Icon Description DC power to the systemAC power source Icon Present indicator Description SupplyIndicator Description Fan power indicator Solid Green Fan Module IndicatorsAvocent Analog iKVM Switch Module Indicators Avocent iKVM Analog Switch Module OptionalGreen Avocent Analog iKVM Switch Module FeaturesLink indicator Off CMC Module CMC Module FeaturesCMC network cable CMC Fail-Safe ModeCondition Description CMC removal ConditionDescription Daisy-Chain CMC Network ConnectionOther Information You May Need System MessagesPage Page Before You Begin Initial Setup SequenceInitial CMC Network Configuration Configuring The CMC Using a Management Station And CLI Configuring The CMC Using The LCD Configuration WizardHttps//CMC IP addressport number Logging In To The CMC Using The Web-Based InterfaceHttps//CMC IP address Adding And Managing CMC Users Configuring iDRAC Networking Using The Web-Based InterfaceConfiguring And Managing Power Setting The First Boot Device For ServersInstalling Or Updating The CMC Firmware Click Setup → DeployDownloading The CMC Firmware Updating The CMC Firmware Using The Web-Based InterfaceUpdating The CMC Firmware Using Racadm Configuring The Optional iKVM Switch ModuleTiering The Avocent iKVM Switch From a Digital KVM Switch Updating The iKVM FirmwareClick Setup → Devices → Device Modify Tiering The Avocent iKVM Switch From An Analog KVM SwitchConfiguring The Analog Switch Viewing And Selecting Servers FlexAddress Plus FlexAddressNetwork Information General I/O Module Configuration GuidelinesConnectivity Fabric aFabric C Fabric BMezzanine Cards PowerEdge M610x OnlyFull-Height Blades Half-Height BladesEthernet switch Dual-Port Mezzanine Cards Module Port Mapping-Full-Height BladesStandard LOM Dual-Port Mapping Blade Module Mezzanine Card C Port Mezzanine Card B Example of PowerEdge M610x Port Mapping BladeBlade Module Blade Module Quad-Port Mezzanine Cards Portn+16 Module Port MappingHalf-Height Blades Example of Half-Height Blade Port Mapping Blade n Module Modules-SwitchesBrocade M6505 16 Gbps FC SAN I/O Module Brocade M6505 16 Gbps FC SAN I/O ModuleCisco Nexus B22 Fabric Extender Module Dell PowerEdge M I/O Aggregator SwitchDell PowerEdge M I/O Aggregator Switch Dell Force10 MXL 10/40 GbE SwitchDell Force10 MXL 10/40 GbE Switch I/O Module Mellanox M4001F/M4001Q/M4001T Infiniband Switch I/O ModuleMellanox M4001F/M4001Q/M4001T Infiniband Switch Module Dell PowerConnect KR 8024-k SwitchDell PowerConnect KR 8024-k Switch Dell PowerConnect M8428-k 10 Gb Converged Network SwitchDell PowerConnect M8428-k 10 Gb Converged Network Switch Mellanox M2401G DDR Infiniband Switch I/O ModuleMellanox M2401G DDR Infiniband Switch Module Mellanox M3601Q QDR Infiniband Switch I/O ModuleMellanox M3601Q QDR Infiniband Switch I/O Module Cisco Catalyst Ethernet Switch I/O ModulesCisco Catalyst Ethernet Switch Module Features Dell PowerConnect M6348 1 Gb Ethernet Switch I/O ModulePowerConnect M6348 1 Gb Ethernet Switch I/O Module Features Dell PowerConnect M6220 Ethernet Switch I/O ModulePowerConnect M6220 Ethernet Switch I/O Module Dell PowerConnect M8024 10 Gb Ethernet Switch I/O ModuleDell 8/4 Gbps FC SAN Module PowerConnect M8024 10 Gb Ethernet Switch I/O ModuleDell 8/4 Gbps FC SAN Module Brocade M5424 FC8 I/O ModuleBrocade M5424 FC8 I/O Module Indicator Status Off No signal carrier Amber onDell 4 Gbps Fibre Channel Pass-Through Module Modules-Pass-ThroughGreen on, one fast amber blink 1 Gb link established With EmulexGreen on, two fast amber blinks 2 Gb link established Green on, three fast amber blinks 4 Gb link establishedDell 10 GbE KR Pass-Through I/O Module 10/100/1000 Mb Ethernet Pass-Through I/O Module Dell 10 Gb Ethernet Pass-Through ModuleActivity indicators Power indicator Link indicators Page Removing a Blade Removing And Installing a BladeRecommended Tools Blade handle Guide rail on enclosure Release button Installing a Blade Power Supply ModulesPower Supply Blanks AC Power Supply ModulesRemoving An AC Power Supply Installing An AC Power Supply Wiring Instructions For a DC Power Supply DC Power Supply ModulesInput Requirements Assembling The DC Input Power Wires And DC Power Connector DC power socket Removing a DC Power Supply Installing a DC Power Supply Removing a Fan Module Fan ModulesRemoving a CMC Module Installing a Fan ModuleCMC Module SD Card Installing a CMC ModuleSelect the Reset CMC warm boot button Click the Power Management tabIKVM Module Removing An iKVM ModuleModules Installing An iKVM ModuleRemoving An I/O Module Installing An I/O ModuleRemoving The Enclosure Bezel Enclosure BezelEnclosure Midplane Installing The Enclosure BezelRemoving The Front Module Cage Assembly And Midplane Front module cage assembly Removing and Installing the Midplane Installing The Midplane And Front Module Cage AssemblyRemoving The Control Panel Enclosure Control Panel AssemblyRemoving The LCD Module Installing The Control PanelRemoving and Installing the LCD Module Installing The LCD ModuleTroubleshooting Enclosure Components Troubleshooting The EnclosureTroubleshooting Power Supply Modules Troubleshooting a Wet EnclosureTroubleshooting I/O Modules Troubleshooting Fan ModulesTroubleshooting The iKVM Module Page Power Supply Module Enclosure SpecificationsOptional Avocent iKVM Module Module SpecificationsChassis Management Controller Module Enclosure Control PanelDell Force10 MXL 10/40 GbE Switch Module Dell PowerEdge M I/O Aggregator Switch ModulePowerConnect M6220 Ethernet Switch Module Brocade M6505 16 Gbps FC SAN I/O ModuleBrocade FC4 Fibre Channel Switch Module Brocade FC8 Fibre Channel Switch ModuleMellanox Infiniband Switch Module Gb Ethernet Pass-Through ModuleEnvironmental Ethernet switch I/O module Contacting Dell Getting Help
Related manuals
Manual 2 pages 36.05 Kb Manual 108 pages 15.26 Kb Manual 86 pages 34.71 Kb Manual 86 pages 40.45 Kb Manual 12 pages 5.14 Kb

M1000E specifications

The Dell M1000E blade enclosure is a robust and versatile platform designed to optimize data center efficiency and streamline server management. A fundamental component of Dell's PowerEdge series, the M1000E is engineered to house multiple server blades in a compact, modular chassis, enabling organizations to conserve space and reduce power consumption while enhancing performance.

One of the main features of the Dell M1000E is its ability to accommodate up to 16 half-height server blades or 8 full-height server blades. This flexibility allows for a diverse range of configurations tailored to specific workloads, whether for virtualization, database management, or application hosting. The chassis provides shared power supplies and cooling, further contributing to the enclosure's efficient operation.

In terms of connectivity, the M1000E includes integrated high-speed networking capabilities. It can support multiple generations of networking technologies, ranging from Gigabit Ethernet to 10 Gigabit Ethernet, and offers options for Fibre Channel and InfiniBand connections. This extensive range of networking options ensures that organizations can integrate the M1000E into existing infrastructures seamlessly.

The Dell M1000E also utilizes advanced management tools to simplify administration and monitoring. One of the standout features is the Dell OpenManage suite, which provides a comprehensive set of tools for hardware management and system updates. Users gain insights into system health, performance, and power usage, enabling proactive maintenance and optimization of resources.

The enclosure is designed with scalability in mind. As businesses grow, the M1000E can be expanded easily by adding more blades without the need for significant reconfiguration. This scalability ensures that IT departments can respond rapidly to changing demands, ensuring that resources align with organizational requirements.

From a security standpoint, the M1000E provides multiple layers of protection, including secure access controls and configurable management interfaces. This helps safeguard sensitive information and ensures compliance with stringent data protection regulations.

Overall, the Dell M1000E blade enclosure represents a compelling solution for modern data centers, merging performance, efficiency, and scalability into a single chassis designed to meet the demands of today’s enterprise environments. Its advanced technologies and features make it a valuable asset for organizations looking to enhance their IT infrastructure.