Dell M1000E Module Specifications, Optional Avocent iKVM Module, Enclosure Control Panel

Page 98

Power Supply Module

Maximum inrush current

Under typical input voltage conditions and over the entire

 

system ambient operating range, the inrush current may

 

reach 120 A per power supply for 10 ms or less.

System voltage requirements

75 A, 48 V DC to 60 V DC

 

 

Optional Avocent iKVM Module

 

 

 

Externally accessible connectors

 

USB

Two 4-pin, USB 2.0-compliant connectors for keyboard and

 

mouse support

ACI port

RJ-45

Video

15-pin VGA

 

 

Chassis Management Controller Module

 

 

 

Externally accessible connectors

 

Remote management

Two dedicated 10/100/1000 Mb RJ-45 (for integrated

 

Ethernet remote access controller). Gb port connects to the

 

external management network. STK port allows CMCs in

 

adjacent enclosures to be daisy chained.

Serial

9-pin, DTE, 16550-compatible

Video

15-pin VGA

Battery

CR 2032 3.0-V Lithium ion coin cell

 

 

Enclosure Control Panel

 

 

 

Externally accessible connectors

 

USB

Two 4-pin, USB 2.0-compliant connectors for keyboard and

 

mouse support

Video

15-pin VGA

LCD panel features

Four cursor control keys, one select key, LCD screen

I/O Module Specifications

 

 

 

Cisco Nexus B22 Fabric Extender Module

 

 

 

Externally accessible connectors

Sixteen 10 Gb (internal) Ethernet ports and Eight 10 Gigabit

 

Ethernet SFP+ ports that support 10Gbase-SR, 10Gbase-LR,

 

and 10Gbase-ER fabric connections.

98

Image 98
Contents Regulatory Model BMX01 Dell Inc. All Rights Reserved Contents Configuring The I/O Modules General I/O Module Configuration GuidelinesInstalling Enclosure Components Modules-Pass-ThroughGetting Help Troubleshooting The EnclosureTechnical Specifications About Your System System OverviewBlade Numbering Full Height Blades System Control-Panel Features Control-Panel FeaturesLCD Module LCD Module Features LCD DisplayKeyAction Left and right arrows Move between screens Configuration WizardUsing The LCD Module Menus Center buttonBack-Panel Features Back-Panel FeaturesPower Supply Indicators Back-Panel Module Bay NumberingAC power source Icon Present indicator Description DC power to the systemPower supply fault indicator Icon Description SupplyFan Module Indicators Indicator Description Fan power indicator Solid GreenAvocent iKVM Analog Switch Module Optional Avocent Analog iKVM Switch Module IndicatorsGreen Avocent Analog iKVM Switch Module FeaturesLink indicator Off CMC Module Features CMC ModuleCMC network cable CMC Fail-Safe ModeCondition Description CMC removal Daisy-Chain CMC Network Connection ConditionDescriptionSystem Messages Other Information You May NeedPage Page Before You Begin Initial Setup SequenceInitial CMC Network Configuration Configuring The CMC Using The LCD Configuration Wizard Configuring The CMC Using a Management Station And CLIHttps//CMC IP addressport number Logging In To The CMC Using The Web-Based InterfaceHttps//CMC IP address Configuring iDRAC Networking Using The Web-Based Interface Adding And Managing CMC UsersInstalling Or Updating The CMC Firmware Setting The First Boot Device For ServersConfiguring And Managing Power Click Setup → DeployUpdating The CMC Firmware Using The Web-Based Interface Downloading The CMC FirmwareTiering The Avocent iKVM Switch From a Digital KVM Switch Configuring The Optional iKVM Switch ModuleUpdating The CMC Firmware Using Racadm Updating The iKVM FirmwareClick Setup → Devices → Device Modify Tiering The Avocent iKVM Switch From An Analog KVM SwitchConfiguring The Analog Switch Viewing And Selecting Servers FlexAddress FlexAddress PlusConnectivity General I/O Module Configuration GuidelinesNetwork Information Fabric aFabric B Fabric CFull-Height Blades PowerEdge M610x OnlyMezzanine Cards Half-Height BladesEthernet switch Dual-Port Mezzanine Cards Module Port Mapping-Full-Height BladesStandard LOM Dual-Port Mapping Example of PowerEdge M610x Port Mapping Blade Blade Module Mezzanine Card C Port Mezzanine Card BBlade Module Blade Module Quad-Port Mezzanine Cards Portn+16 Module Port MappingHalf-Height Blades Example of Half-Height Blade Port Mapping Modules-Switches Blade n ModuleBrocade M6505 16 Gbps FC SAN I/O Module Brocade M6505 16 Gbps FC SAN I/O ModuleDell PowerEdge M I/O Aggregator Switch Cisco Nexus B22 Fabric Extender ModuleDell Force10 MXL 10/40 GbE Switch Dell PowerEdge M I/O Aggregator SwitchMellanox M4001F/M4001Q/M4001T Infiniband Switch I/O Module Dell Force10 MXL 10/40 GbE Switch I/O ModuleDell PowerConnect KR 8024-k Switch Mellanox M4001F/M4001Q/M4001T Infiniband Switch ModuleDell PowerConnect M8428-k 10 Gb Converged Network Switch Dell PowerConnect KR 8024-k SwitchMellanox M2401G DDR Infiniband Switch I/O Module Dell PowerConnect M8428-k 10 Gb Converged Network SwitchMellanox M3601Q QDR Infiniband Switch I/O Module Mellanox M2401G DDR Infiniband Switch ModuleCisco Catalyst Ethernet Switch I/O Modules Mellanox M3601Q QDR Infiniband Switch I/O ModuleDell PowerConnect M6348 1 Gb Ethernet Switch I/O Module Cisco Catalyst Ethernet Switch Module FeaturesDell PowerConnect M6220 Ethernet Switch I/O Module PowerConnect M6348 1 Gb Ethernet Switch I/O Module FeaturesDell PowerConnect M8024 10 Gb Ethernet Switch I/O Module PowerConnect M6220 Ethernet Switch I/O ModulePowerConnect M8024 10 Gb Ethernet Switch I/O Module Dell 8/4 Gbps FC SAN ModuleBrocade M5424 FC8 I/O Module Dell 8/4 Gbps FC SAN ModuleIndicator Status Off No signal carrier Amber on Brocade M5424 FC8 I/O ModuleModules-Pass-Through Dell 4 Gbps Fibre Channel Pass-Through ModuleGreen on, two fast amber blinks 2 Gb link established With EmulexGreen on, one fast amber blink 1 Gb link established Green on, three fast amber blinks 4 Gb link establishedDell 10 GbE KR Pass-Through I/O Module Dell 10 Gb Ethernet Pass-Through Module 10/100/1000 Mb Ethernet Pass-Through I/O ModuleActivity indicators Power indicator Link indicators Page Removing a Blade Removing And Installing a BladeRecommended Tools Blade handle Guide rail on enclosure Release button Power Supply Blanks Power Supply ModulesInstalling a Blade AC Power Supply ModulesRemoving An AC Power Supply Installing An AC Power Supply DC Power Supply Modules Wiring Instructions For a DC Power SupplyInput Requirements Assembling The DC Input Power Wires And DC Power Connector DC power socket Removing a DC Power Supply Installing a DC Power Supply Fan Modules Removing a Fan ModuleInstalling a Fan Module Removing a CMC ModuleInstalling a CMC Module CMC Module SD CardIKVM Module Click the Power Management tabSelect the Reset CMC warm boot button Removing An iKVM ModuleInstalling An iKVM Module ModulesInstalling An I/O Module Removing An I/O ModuleEnclosure Bezel Removing The Enclosure BezelEnclosure Midplane Installing The Enclosure BezelRemoving The Front Module Cage Assembly And Midplane Front module cage assembly Installing The Midplane And Front Module Cage Assembly Removing and Installing the MidplaneEnclosure Control Panel Assembly Removing The Control PanelInstalling The Control Panel Removing The LCD ModuleInstalling The LCD Module Removing and Installing the LCD ModuleTroubleshooting The Enclosure Troubleshooting Enclosure ComponentsTroubleshooting a Wet Enclosure Troubleshooting Power Supply ModulesTroubleshooting I/O Modules Troubleshooting Fan ModulesTroubleshooting The iKVM Module Page Enclosure Specifications Power Supply ModuleChassis Management Controller Module Module SpecificationsOptional Avocent iKVM Module Enclosure Control PanelPowerConnect M6220 Ethernet Switch Module Dell PowerEdge M I/O Aggregator Switch ModuleDell Force10 MXL 10/40 GbE Switch Module Brocade M6505 16 Gbps FC SAN I/O ModuleMellanox Infiniband Switch Module Brocade FC8 Fibre Channel Switch ModuleBrocade FC4 Fibre Channel Switch Module Gb Ethernet Pass-Through ModuleEnvironmental Ethernet switch I/O module Getting Help Contacting Dell
Related manuals
Manual 2 pages 36.05 Kb Manual 108 pages 15.26 Kb Manual 86 pages 34.71 Kb Manual 86 pages 40.45 Kb Manual 12 pages 5.14 Kb

M1000E specifications

The Dell M1000E blade enclosure is a robust and versatile platform designed to optimize data center efficiency and streamline server management. A fundamental component of Dell's PowerEdge series, the M1000E is engineered to house multiple server blades in a compact, modular chassis, enabling organizations to conserve space and reduce power consumption while enhancing performance.

One of the main features of the Dell M1000E is its ability to accommodate up to 16 half-height server blades or 8 full-height server blades. This flexibility allows for a diverse range of configurations tailored to specific workloads, whether for virtualization, database management, or application hosting. The chassis provides shared power supplies and cooling, further contributing to the enclosure's efficient operation.

In terms of connectivity, the M1000E includes integrated high-speed networking capabilities. It can support multiple generations of networking technologies, ranging from Gigabit Ethernet to 10 Gigabit Ethernet, and offers options for Fibre Channel and InfiniBand connections. This extensive range of networking options ensures that organizations can integrate the M1000E into existing infrastructures seamlessly.

The Dell M1000E also utilizes advanced management tools to simplify administration and monitoring. One of the standout features is the Dell OpenManage suite, which provides a comprehensive set of tools for hardware management and system updates. Users gain insights into system health, performance, and power usage, enabling proactive maintenance and optimization of resources.

The enclosure is designed with scalability in mind. As businesses grow, the M1000E can be expanded easily by adding more blades without the need for significant reconfiguration. This scalability ensures that IT departments can respond rapidly to changing demands, ensuring that resources align with organizational requirements.

From a security standpoint, the M1000E provides multiple layers of protection, including secure access controls and configurable management interfaces. This helps safeguard sensitive information and ensures compliance with stringent data protection regulations.

Overall, the Dell M1000E blade enclosure represents a compelling solution for modern data centers, merging performance, efficiency, and scalability into a single chassis designed to meet the demands of today’s enterprise environments. Its advanced technologies and features make it a valuable asset for organizations looking to enhance their IT infrastructure.