Dell 3010 owner manual Installing The Expansion Card, Removing the Optical Drive

Page 12

Related Links

Installing the Expansion Card

Installing The Expansion Card

1.Insert the PCIe x4 card into the connector on the system board and press down to secure it in place.

2.Insert the PCIe card (if any) into the connector on the system board and press down to secure it in place.

3.Insert the PCIe x1 card (if any) into the connector on the system board and press down to secure it in place.

4.Insert the PCIe x16 card (if any) into the connector on the system board and press down to secure it in place.

5.Press the retention tab on the card-retention latch downwards.

6.Install the cover.

7.Follow the procedures in After Working Inside Your Computer.

Related Links

Removing The Expansion Card

Removing the Optical Drive

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the cover.

3.Remove the front bezel.

4.Remove the data cable and power cable from the back of the optical drive.

5.Slide down the optical-drive latch and then push the optical drive from the back towards the front of the computer.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Regulatory Model D12M Regulatory Type D12M001 Dell Inc Contents System Setup TroubleshootingAlert! Security override Jumper is installed Specifications Contacting DellPage Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer After Working Inside Your ComputerClick Shut Down Installing the Cover Removing the CoverRelated Links Installing The Front Bezel Removing the Front BezelRemoving the Expansion Card Page Installing The Expansion Card Removing the Optical DriveInstalling The Optical Drive Removing the Hard DriveInstalling The Hard Drive Removing the MemoryInstalling the Memory Removing The Chassis Intrusion SwitchInstalling the Intrusion Switch Removing The SpeakerInstalling the Speaker Removing the Heat Sink and Processor Installing the Heat Sink and Processor Removing The Coin-Cell Battery Installing The Coin-Cell BatteryRemoving the Power-Switch Cable Remove the cover Remove the front bezelPage Installing the Power-Switch Cable Removing the Front Thermal SensorInstalling the Front Thermal Sensor Removing The System FanInstalling the System Fan Removing the Input/Output PanelInstalling the Input/Output Panel Installing the Input/Output Panel Removing The Power SupplyPage Installing the Power Supply Removing The System BoardInstalling The System Board Install the front bezel Install the coverPage System Setup Boot MenuBoot Menu Enhancements CtrlAltF8 One-time boot and diagnostics utility menu F12Beep Codes and Text Error Messages Timing Key SequencesNavigation Action KeystrokeSystem Setup Options Date, Manufacture Date, and the Express Service CodeOption Description Size, Dimm 3 Size, and Dimm 4 SizeDisabled = The Sata controllers are hidden ATA = Sata is configured for ATA modeSystem startup. This option is disabled by default This option is not set by defaultAdministrative password and the system password Password BypassPassword prompts during a system restart They are set. This option is disabled by defaultReset All Keys- Resets to default setting Keys will restore to default settingsIs disabled by default Disabled by defaultEnable F12 Boot menu enabled by default This option is set to Thorough by default Not set by defaultSoftware communicates. The default IP address is Default IP port isClient IP Is set to Static IPClient Subnet Mask Client GatewayPage Diagnostic LEDs Diagnostic Light PatternsProblem Description Power Button Problem DescriptionLED If the problem persists, the system board is faulty Reinstalled all modules without errorPossible system board failure has occurred Description Occurred Troubleshooting LED Beep Codes Code CauseCode Unexpected interrupt in protected mode Error Messages Diskette subsystem reset failed Hard-disk drive configuration errorController has failed Decreasing available memoryInvalid configuration information-please run Setup program Invalid Memory configuration, please populate DIMM1Memory allocation error Hard-disk drive controller failureNo boot device available No boot sector on hard-disk driveNo timer tick interrupt Non-system disk or disk errorNot a boot diskette Plug and play configuration errorReset failed Seek errorTimer chip counter 2 failed Unexpected interrupt in protected modeWrite fault Write fault on selected driveSpecification System InformationProcessor MemoryAudio NetworkExpansion Bus CardsExternal Connectors System Board ConnectorsMini-Tower Two Desktop One Small Form Factor Audio Back Panel Mini-Tower/DesktopControls and Lights Physical Height Width Depth Weight EnvironmentalPage Contacting Dell Contacting Dell
Related manuals
Manual 3 pages 40.29 Kb

3010 specifications

The Dell PowerEdge T310 is a versatile tower server that is designed for small to medium-sized businesses looking for a reliable and efficient server solution. The T310 offers a range of features and technologies to meet various IT needs, making it a popular choice among businesses.

One of the standout features of the Dell T310 is its robust processing power. It is equipped with Intel's Xeon processor, which delivers outstanding performance and energy efficiency. This multi-core architecture allows for enhanced multitasking capabilities, ensuring that businesses can run multiple applications simultaneously without degradation in performance.

In terms of memory, the T310 supports up to 32GB of DDR3 RAM, providing ample space for data-intensive tasks. This capacity makes it suitable for applications such as virtualization, database management, and file sharing, empowering organizations to operate more efficiently.

Storage options on the Dell PowerEdge T310 are also impressive. The server supports multiple hard drive configurations, including up to four 3.5-inch SATA or SAS drives. This scalability allows businesses to customize their storage solutions based on their specific requirements for data storage and retrieval. RAID configurations offer additional data protection and improved performance, ensuring that critical data is always safe.

The T310 also features advanced management technologies, including Dell's OpenManage systems management console. This tool provides IT administrators with the ability to monitor and manage systems with ease, enabling proactive maintenance and troubleshooting. This not only improves the server's uptime but also enhances overall operational efficiency.

Security is another critical aspect of the T310 design. Equipped with features such as a Trusted Platform Module (TPM) and system lock, the server provides robust protection against unauthorized access. These security features ensure that sensitive business data remains protected from potential threats.

Furthermore, the Dell PowerEdge T310 has a compact form factor, making it an excellent choice for businesses with limited space. Its quiet operation and efficient cooling system allow it to blend seamlessly into office environments without causing disturbances.

In conclusion, the Dell PowerEdge T310 is a powerful, flexible, and secure server that caters to the needs of small to medium-sized businesses. With its advanced processing capabilities, significant memory capacity, versatile storage options, and strong management features, the T310 stands out as a reliable solution for various IT demands. Its combination of performance, scalability, and security makes it an ideal choice for businesses looking to enhance their IT infrastructure.
Top Page Image Contents