Dell 3010 System Setup Options, Option Description, Size, Dimm 3 Size, and Dimm 4 Size, Address

Action	Keystroke
Exit BIOS	<Esc> — Remain in Setup, Save/Exit, Discard/Exit
Change a setting	Left or right-arrow key
Select field to change	<Enter>
Cancel modification	<Esc>
Reset defaults	<Alt><F> or Load Defaults menu option

System Setup Options

NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear.

Table 1. General

Option	Description
System Information	Displays the following information:
	• System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership
		Date, Manufacture Date, and the Express Service Code.
	• Memory Information: Displays Memory Installed, Memory Available, Memory
		Speed, Memory Channels Mode, Memory Technology, DIMM 1 Size, DIMM 2
		Size, DIMM 3 Size, and DIMM 4 Size.
	• Processor Information: Displays Processor Type, Core Count, Processor ID,
		Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed,
		Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit Technology.
	• PCI Information: Displays SLOT1, SLOT2, SLOT3, SLOT4
	• Device Information: Displays SATA-0, SATA-1, SATA-2, SATA-3, and LOM MAC
		Address.
Boot Sequence	Allows you to specify the order in which the computer attempts to find an operating
	system from the devices specified in this list.
	•	USB Storage Device
	•	CD/DVD/CD-RW Drive
	•	Onboard NIC
Date/Time	Allows you to set the date and time settings. Changes to the system date and time take
	effect immediately.
Table 2. System Configuration
Option	Description
Integrated NIC	Allows you to enable or disable the integrated network card. You can set the integrated
	NIC to:
	•	Disabled
	•	Enabled (default)
	•	Enabled w/PXE
	•	Enabled w/ImageServer

33