Dell 3010 Controller has failed, Decreasing available memory, Diskette drive 0 seek failure

Page 50

Controller has failed

Description

The hard drive or the associated controller is defective.

Data error

 

Description

The floppy or hard drive cannot read the data. For the Windows operating system, run the

 

chkdsk utility to check the file structure of the floppy or hard drive. For any other operating

 

system, run the appropriate corresponding utility.

Decreasing available memory

Description

One or more memory modules may be faulty or improperly seated. Re-install the memory

 

modules and, if necessary, replace them.

Diskette drive 0 seek failure

Description

A cable may be loose or the computer configuration information may not match the hardware

 

configuration.

Diskette read failure

Description

The floppy disk may be defective or a cable may be loose. If the drive access light turns on, try

 

a different disk.

Diskette subsystem reset failed

Description

The floppy drive controller may be faulty.

Gate A20 failure

 

Description

One or more memory modules may be faulty or improperly seated. Reinstall the memory

 

modules and, if necessary, replace them.

General failure

 

Description

The operating system is unable to carry out the command. This message is usually followed by

 

specific information—for example, Printer out of paper. Take the appropriate action to resolve

 

the problem.

Hard-disk drive configuration error

Description

The hard drive failed initialization.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Regulatory Model D12M Regulatory Type D12M001 Dell Inc Contents Alert! Security override Jumper is installed System SetupTroubleshooting Specifications Contacting DellPage Working on Your Computer Before Working Inside Your ComputerClick Shut Down Turning Off Your ComputerAfter Working Inside Your Computer Related Links Installing the CoverRemoving the Cover Removing the Expansion Card Installing The Front BezelRemoving the Front Bezel Page Installing The Expansion Card Removing the Optical DriveInstalling The Optical Drive Removing the Hard DriveInstalling The Hard Drive Removing the MemoryInstalling the Memory Removing The Chassis Intrusion SwitchInstalling the Intrusion Switch Removing The SpeakerInstalling the Speaker Removing the Heat Sink and Processor Installing the Heat Sink and Processor Removing the Power-Switch Cable Removing The Coin-Cell BatteryInstalling The Coin-Cell Battery Remove the cover Remove the front bezelPage Installing the Power-Switch Cable Removing the Front Thermal SensorInstalling the Front Thermal Sensor Removing The System FanInstalling the System Fan Removing the Input/Output PanelInstalling the Input/Output Panel Installing the Input/Output Panel Removing The Power SupplyPage Installing the Power Supply Removing The System BoardInstalling The System Board Install the front bezel Install the coverPage Boot Menu Enhancements System SetupBoot Menu CtrlAltF8 One-time boot and diagnostics utility menu F12Navigation Beep Codes and Text Error MessagesTiming Key Sequences Action KeystrokeOption Description System Setup OptionsDate, Manufacture Date, and the Express Service Code Size, Dimm 3 Size, and Dimm 4 SizeSystem startup. This option is disabled by default Disabled = The Sata controllers are hiddenATA = Sata is configured for ATA mode This option is not set by defaultPassword prompts during a system restart Administrative password and the system passwordPassword Bypass They are set. This option is disabled by defaultIs disabled by default Reset All Keys- Resets to default settingKeys will restore to default settings Disabled by defaultEnable F12 Boot menu enabled by default Software communicates. The default IP address is This option is set to Thorough by defaultNot set by default Default IP port isClient Subnet Mask Client IPIs set to Static IP Client GatewayPage Diagnostic LEDs Diagnostic Light PatternsProblem Description Power Button Problem DescriptionLED Possible system board failure has occurred If the problem persists, the system board is faultyReinstalled all modules without error Description Occurred Troubleshooting LED Code Beep CodesCode Cause Unexpected interrupt in protected mode Error Messages Controller has failed Diskette subsystem reset failedHard-disk drive configuration error Decreasing available memoryMemory allocation error Invalid configuration information-please run Setup programInvalid Memory configuration, please populate DIMM1 Hard-disk drive controller failureNo timer tick interrupt No boot device availableNo boot sector on hard-disk drive Non-system disk or disk errorReset failed Not a boot diskettePlug and play configuration error Seek errorWrite fault Timer chip counter 2 failedUnexpected interrupt in protected mode Write fault on selected driveProcessor SpecificationSystem Information MemoryExpansion Bus AudioNetwork CardsMini-Tower Two Desktop One Small Form Factor External ConnectorsSystem Board Connectors Audio Back Panel Mini-Tower/DesktopControls and Lights Physical Height Width Depth Weight EnvironmentalPage Contacting Dell Contacting Dell
Related manuals
Manual 3 pages 40.29 Kb

3010 specifications

The Dell PowerEdge T310 is a versatile tower server that is designed for small to medium-sized businesses looking for a reliable and efficient server solution. The T310 offers a range of features and technologies to meet various IT needs, making it a popular choice among businesses.

One of the standout features of the Dell T310 is its robust processing power. It is equipped with Intel's Xeon processor, which delivers outstanding performance and energy efficiency. This multi-core architecture allows for enhanced multitasking capabilities, ensuring that businesses can run multiple applications simultaneously without degradation in performance.

In terms of memory, the T310 supports up to 32GB of DDR3 RAM, providing ample space for data-intensive tasks. This capacity makes it suitable for applications such as virtualization, database management, and file sharing, empowering organizations to operate more efficiently.

Storage options on the Dell PowerEdge T310 are also impressive. The server supports multiple hard drive configurations, including up to four 3.5-inch SATA or SAS drives. This scalability allows businesses to customize their storage solutions based on their specific requirements for data storage and retrieval. RAID configurations offer additional data protection and improved performance, ensuring that critical data is always safe.

The T310 also features advanced management technologies, including Dell's OpenManage systems management console. This tool provides IT administrators with the ability to monitor and manage systems with ease, enabling proactive maintenance and troubleshooting. This not only improves the server's uptime but also enhances overall operational efficiency.

Security is another critical aspect of the T310 design. Equipped with features such as a Trusted Platform Module (TPM) and system lock, the server provides robust protection against unauthorized access. These security features ensure that sensitive business data remains protected from potential threats.

Furthermore, the Dell PowerEdge T310 has a compact form factor, making it an excellent choice for businesses with limited space. Its quiet operation and efficient cooling system allow it to blend seamlessly into office environments without causing disturbances.

In conclusion, the Dell PowerEdge T310 is a powerful, flexible, and secure server that caters to the needs of small to medium-sized businesses. With its advanced processing capabilities, significant memory capacity, versatile storage options, and strong management features, the T310 stands out as a reliable solution for various IT demands. Its combination of performance, scalability, and security makes it an ideal choice for businesses looking to enhance their IT infrastructure.
Top Page Image Contents