Dell 3010 owner manual Client IP, Is set to Static IP, Client Subnet Mask, Client Gateway

Page 39

Option

Description

 

 

 

 

 

NOTE: This field is only relevant when the "Integrated NIC" control in the "System

 

 

Configuration" group is set to "Enabled with ImageServer".

Client IP

Specifies the static IP address of the client. The default IP address is 255.255.255.255.

 

 

NOTE: This field is only relevant when the "Integrated NIC" control in the "System

 

 

Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP"

 

 

is set to "Static IP".

Client Subnet Mask

Specifies the subnet mask of the client. The default setting is 255.255.255.255.

 

 

NOTE: This field is only relevant when the "Integrated NIC" control in the "System

 

 

Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP"

 

 

is set to "Static IP".

Client Gateway

Specifies the gateway IP address for the client. The default setting is 255.255.255.255.

 

 

NOTE: This field is only relevant when the "Integrated NIC" control in the "System

 

 

Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP"

 

 

is set to "Static IP".

License Status

Displays the current license status.

Table 11. System Logs

 

 

 

 

Option

Description

 

 

BIOS Events

Displays the system event log and allows you to:

 

Clear Log

 

Mark all Entries

39

Image 39
Contents Regulatory Model D12M Regulatory Type D12M001 Dell Inc Contents System Setup TroubleshootingAlert! Security override Jumper is installed Contacting Dell SpecificationsPage Before Working Inside Your Computer Working on Your ComputerTurning Off Your Computer After Working Inside Your ComputerClick Shut Down Installing the Cover Removing the CoverRelated Links Installing The Front Bezel Removing the Front BezelRemoving the Expansion Card Page Removing the Optical Drive Installing The Expansion CardRemoving the Hard Drive Installing The Optical DriveRemoving the Memory Installing The Hard DriveRemoving The Chassis Intrusion Switch Installing the MemoryRemoving The Speaker Installing the Intrusion SwitchInstalling the Speaker Removing the Heat Sink and Processor Installing the Heat Sink and Processor Remove the cover Remove the front bezel Removing The Coin-Cell BatteryInstalling The Coin-Cell Battery Removing the Power-Switch CablePage Removing the Front Thermal Sensor Installing the Power-Switch CableRemoving The System Fan Installing the Front Thermal SensorRemoving the Input/Output Panel Installing the System FanInstalling the Input/Output Panel Removing The Power Supply Installing the Input/Output PanelPage Removing The System Board Installing the Power SupplyInstall the front bezel Install the cover Installing The System BoardPage CtrlAltF8 One-time boot and diagnostics utility menu F12 System SetupBoot Menu Boot Menu EnhancementsAction Keystroke Beep Codes and Text Error MessagesTiming Key Sequences NavigationSize, Dimm 3 Size, and Dimm 4 Size System Setup OptionsDate, Manufacture Date, and the Express Service Code Option DescriptionThis option is not set by default Disabled = The Sata controllers are hiddenATA = Sata is configured for ATA mode System startup. This option is disabled by defaultThey are set. This option is disabled by default Administrative password and the system passwordPassword Bypass Password prompts during a system restartDisabled by default Reset All Keys- Resets to default settingKeys will restore to default settings Is disabled by defaultEnable F12 Boot menu enabled by default Default IP port is This option is set to Thorough by defaultNot set by default Software communicates. The default IP address isClient Gateway Client IPIs set to Static IP Client Subnet MaskPage Diagnostic Light Patterns Diagnostic LEDsPower Button Problem Description Problem DescriptionLED If the problem persists, the system board is faulty Reinstalled all modules without errorPossible system board failure has occurred Description Occurred Troubleshooting LED Beep Codes Code CauseCode Unexpected interrupt in protected mode Error Messages Decreasing available memory Diskette subsystem reset failedHard-disk drive configuration error Controller has failedHard-disk drive controller failure Invalid configuration information-please run Setup programInvalid Memory configuration, please populate DIMM1 Memory allocation errorNon-system disk or disk error No boot device availableNo boot sector on hard-disk drive No timer tick interruptSeek error Not a boot diskettePlug and play configuration error Reset failedWrite fault on selected drive Timer chip counter 2 failedUnexpected interrupt in protected mode Write faultMemory SpecificationSystem Information ProcessorCards AudioNetwork Expansion BusAudio Back Panel Mini-Tower/Desktop External ConnectorsSystem Board Connectors Mini-Tower Two Desktop One Small Form FactorControls and Lights Environmental Physical Height Width Depth WeightPage Contacting Dell Contacting Dell
Related manuals
Manual 3 pages 40.29 Kb

3010 specifications

The Dell PowerEdge T310 is a versatile tower server that is designed for small to medium-sized businesses looking for a reliable and efficient server solution. The T310 offers a range of features and technologies to meet various IT needs, making it a popular choice among businesses.

One of the standout features of the Dell T310 is its robust processing power. It is equipped with Intel's Xeon processor, which delivers outstanding performance and energy efficiency. This multi-core architecture allows for enhanced multitasking capabilities, ensuring that businesses can run multiple applications simultaneously without degradation in performance.

In terms of memory, the T310 supports up to 32GB of DDR3 RAM, providing ample space for data-intensive tasks. This capacity makes it suitable for applications such as virtualization, database management, and file sharing, empowering organizations to operate more efficiently.

Storage options on the Dell PowerEdge T310 are also impressive. The server supports multiple hard drive configurations, including up to four 3.5-inch SATA or SAS drives. This scalability allows businesses to customize their storage solutions based on their specific requirements for data storage and retrieval. RAID configurations offer additional data protection and improved performance, ensuring that critical data is always safe.

The T310 also features advanced management technologies, including Dell's OpenManage systems management console. This tool provides IT administrators with the ability to monitor and manage systems with ease, enabling proactive maintenance and troubleshooting. This not only improves the server's uptime but also enhances overall operational efficiency.

Security is another critical aspect of the T310 design. Equipped with features such as a Trusted Platform Module (TPM) and system lock, the server provides robust protection against unauthorized access. These security features ensure that sensitive business data remains protected from potential threats.

Furthermore, the Dell PowerEdge T310 has a compact form factor, making it an excellent choice for businesses with limited space. Its quiet operation and efficient cooling system allow it to blend seamlessly into office environments without causing disturbances.

In conclusion, the Dell PowerEdge T310 is a powerful, flexible, and secure server that caters to the needs of small to medium-sized businesses. With its advanced processing capabilities, significant memory capacity, versatile storage options, and strong management features, the T310 stands out as a reliable solution for various IT demands. Its combination of performance, scalability, and security makes it an ideal choice for businesses looking to enhance their IT infrastructure.