Dell 3010 owner manual Specifications, Contacting Dell

Page 5

Memory write/read failure at address, read value expecting value

52

Memory size in CMOS invalid

52

Memory tests terminated by keystroke

52

No boot device available

52

No boot sector on hard-disk drive

52

No timer tick interrupt

52

Non-system disk or disk error

52

Not a boot diskette

53

Plug and play configuration error

53

Read fault

53

Requested sector not found

53

Reset failed

53

Sector not found

53

Seek error

53

Shutdown failure

53

Time-of-day clock stopped

53

Time-of-day not set-please run the System Setup program

53

Timer chip counter 2 failed

54

Unexpected interrupt in protected mode

54

WARNING: Dell's Disk Monitoring System has detected that drive [0/1] on the [primary/secondary]

 

EIDE controller is operating outside of normal specifications. It is advisable to immediately back up

 

your data and replace your hard drive by calling your support desk or Dell

54

Write fault

54

Write fault on selected drive

54

X:\ is not accessible. The device is not ready

54

5 Specifications

55

Specification

55

6 Contacting Dell

61

Contacting Dell

61

Image 5
Contents Regulatory Model D12M Regulatory Type D12M001 Dell Inc Contents Alert! Security override Jumper is installed System SetupTroubleshooting Contacting Dell SpecificationsPage Before Working Inside Your Computer Working on Your ComputerClick Shut Down Turning Off Your ComputerAfter Working Inside Your Computer Related Links Installing the CoverRemoving the Cover Removing the Expansion Card Installing The Front BezelRemoving the Front Bezel Page Removing the Optical Drive Installing The Expansion CardRemoving the Hard Drive Installing The Optical DriveRemoving the Memory Installing The Hard DriveRemoving The Chassis Intrusion Switch Installing the MemoryRemoving The Speaker Installing the Intrusion SwitchInstalling the Speaker Removing the Heat Sink and Processor Installing the Heat Sink and Processor Installing The Coin-Cell Battery Removing The Coin-Cell BatteryRemoving the Power-Switch Cable Remove the cover Remove the front bezelPage Removing the Front Thermal Sensor Installing the Power-Switch CableRemoving The System Fan Installing the Front Thermal SensorRemoving the Input/Output Panel Installing the System FanInstalling the Input/Output Panel Removing The Power Supply Installing the Input/Output PanelPage Removing The System Board Installing the Power SupplyInstall the front bezel Install the cover Installing The System BoardPage Boot Menu System SetupBoot Menu Enhancements CtrlAltF8 One-time boot and diagnostics utility menu F12Timing Key Sequences Beep Codes and Text Error MessagesNavigation Action KeystrokeDate, Manufacture Date, and the Express Service Code System Setup OptionsOption Description Size, Dimm 3 Size, and Dimm 4 SizeATA = Sata is configured for ATA mode Disabled = The Sata controllers are hiddenSystem startup. This option is disabled by default This option is not set by defaultPassword Bypass Administrative password and the system passwordPassword prompts during a system restart They are set. This option is disabled by defaultKeys will restore to default settings Reset All Keys- Resets to default settingIs disabled by default Disabled by defaultEnable F12 Boot menu enabled by default Not set by default This option is set to Thorough by defaultSoftware communicates. The default IP address is Default IP port isIs set to Static IP Client IPClient Subnet Mask Client GatewayPage Diagnostic Light Patterns Diagnostic LEDsPower Button Problem Description Problem DescriptionLED Possible system board failure has occurred If the problem persists, the system board is faultyReinstalled all modules without error Description Occurred Troubleshooting LED Code Beep CodesCode Cause Unexpected interrupt in protected mode Error Messages Hard-disk drive configuration error Diskette subsystem reset failedController has failed Decreasing available memoryInvalid Memory configuration, please populate DIMM1 Invalid configuration information-please run Setup programMemory allocation error Hard-disk drive controller failureNo boot sector on hard-disk drive No boot device availableNo timer tick interrupt Non-system disk or disk errorPlug and play configuration error Not a boot disketteReset failed Seek errorUnexpected interrupt in protected mode Timer chip counter 2 failedWrite fault Write fault on selected driveSystem Information SpecificationProcessor MemoryNetwork AudioExpansion Bus CardsSystem Board Connectors External ConnectorsMini-Tower Two Desktop One Small Form Factor Audio Back Panel Mini-Tower/DesktopControls and Lights Environmental Physical Height Width Depth WeightPage Contacting Dell Contacting Dell
Related manuals
Manual 3 pages 40.29 Kb

3010 specifications

The Dell PowerEdge T310 is a versatile tower server that is designed for small to medium-sized businesses looking for a reliable and efficient server solution. The T310 offers a range of features and technologies to meet various IT needs, making it a popular choice among businesses.

One of the standout features of the Dell T310 is its robust processing power. It is equipped with Intel's Xeon processor, which delivers outstanding performance and energy efficiency. This multi-core architecture allows for enhanced multitasking capabilities, ensuring that businesses can run multiple applications simultaneously without degradation in performance.

In terms of memory, the T310 supports up to 32GB of DDR3 RAM, providing ample space for data-intensive tasks. This capacity makes it suitable for applications such as virtualization, database management, and file sharing, empowering organizations to operate more efficiently.

Storage options on the Dell PowerEdge T310 are also impressive. The server supports multiple hard drive configurations, including up to four 3.5-inch SATA or SAS drives. This scalability allows businesses to customize their storage solutions based on their specific requirements for data storage and retrieval. RAID configurations offer additional data protection and improved performance, ensuring that critical data is always safe.

The T310 also features advanced management technologies, including Dell's OpenManage systems management console. This tool provides IT administrators with the ability to monitor and manage systems with ease, enabling proactive maintenance and troubleshooting. This not only improves the server's uptime but also enhances overall operational efficiency.

Security is another critical aspect of the T310 design. Equipped with features such as a Trusted Platform Module (TPM) and system lock, the server provides robust protection against unauthorized access. These security features ensure that sensitive business data remains protected from potential threats.

Furthermore, the Dell PowerEdge T310 has a compact form factor, making it an excellent choice for businesses with limited space. Its quiet operation and efficient cooling system allow it to blend seamlessly into office environments without causing disturbances.

In conclusion, the Dell PowerEdge T310 is a powerful, flexible, and secure server that caters to the needs of small to medium-sized businesses. With its advanced processing capabilities, significant memory capacity, versatile storage options, and strong management features, the T310 stands out as a reliable solution for various IT demands. Its combination of performance, scalability, and security makes it an ideal choice for businesses looking to enhance their IT infrastructure.