f.Hold the heat sink fan assembly in place and rotate the clamp lever 180 degrees clockwise to secure the heat sink and fan assembly.
1 | fan | 2 | fan cover | 3 | heat sink |
|
|
|
|
|
|
4 | bracket | 5 | clamp grip | 6 | bracket projection |
|
|
|
|
|
|
7 | clamp lever |
|
|
|
|
|
|
|
|
|
|
NOTE: Ensure that the processor fan and heat sink assembly is correctly seated and secure.
6.Connect the processor fan and heat sink assembly cable to the CPU_FAN system board connector (see System Board Components).
7.Replace the computer cover (see Replacing the Computer Cover).
8.Connect your computer and devices to an electrical outlet, and turn them on.