Dell 518 manual Boot Sequence

Fast Boot	Disabled; Enabled (Enabled by default)
Numlock Key	OFF;ON (On by default)
Keyboard Errors	Report;Do Not Report (Report by default)
Removable Device	Used to set the device priority of removable devices like USB floppy drives. The items displayed are dynamically updated according
Priority	to the removable devices connected.
Hard Disk Boot	Used to set the device priority of hard drives. The items displayed are dynamically updated according to the hard drives detected.
Priority
First Boot Device	Removable; Hard Disk; CD/DVD; Disabled (Removable by default)
Second Boot Device	Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default)
Third Boot Device	Removable; CD/DVD; Hard Drive; Disabled (Hard Drive by default)
Boot Other Device	No; Yes (Yes by default)
Advanced Chipset Features
Init Display First	PCI-E 16X Slot, PCI-E 1X Slot; PCI Slot; Onboard (PCI-E Slot by default)
UMA Frame Buffer	Auto;32MB;64MB;128MB;256MB;512MB (Auto by default)
Size
Onboard Audio	Auto; Disabled; Enabled (Enabled by default)
Controller
Onboard LAN	Disabled; Enabled (Enabled by default)
Controller
Onboard LAN Boot ROM	Disabled; Enabled (Disabled by default)
USB Device Setting	• USB Controller—Enabled or Disabled (Enabled by default)
	• USB Operation Mode—High Speed; Full/Low Speed (High Speed by default)
Power Management Setup
ACPI Suspend Type	S1(POS); S3(STR) (S3(STR) by default)
C1E Support	Disabled; Enabled (Disabled by default)
Remote Wake Up	Disabled; Enabled (Enabled by default)
AC Recovery	Off; On; Last (Off by default)
Auto Power On	Enabled; Disabled (Disabled by default)
Auto Power On Date	Everyday; 0-30 (Date by default
Auto Power On Time	00:00:00-23:59:50 (Displayed in hh:mm:ss format)
BIOS Security Features
Supervisor Password	Status of supervisor installed
User Password	Status of user installed
Set Supervisor	Enter the desired Supervisor Password
Password
User Access Level	No Access; View Only; Limited; Full Access (View Only by default)
Set User Password	Enter the desired User Password
Password Check	Setup; Always (Setup by default)
Clear User Password	Press Enter to clear user passwords

Boot Sequence

This feature allows you to change the boot sequence for devices.

Boot Options

•Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error message.

•CD/DVD Drive — The computer attempts to boot from the CD/DVD drive. If no CD/DVD is in the drive, or if the CD/DVD has no operating system, the computer generates an error message.

•USB Flash Device — Insert the memory device into a USB port and restart the computer. When F12 = Boot Menu appears in the upper-right corner of the screen, press <F12>. The BIOS detects the device and adds the USB flash option to the boot menu.

NOTE: To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.

Changing Boot Sequence for the Current Boot

You can use this feature, for example, to tell the computer to boot from the CD drive so that you can run the Dell Diagnostics on the Drivers and Utilities media, but you want the computer to boot from the hard drive when the diagnostic tests are complete. You can also use this feature to restart your computer to a