Replace the card retention bracket ensuring that:
•The guide clamp is aligned with the guide notch.
•The tops of all cards and filler brackets are flush with the alignment bar.
•The notch in the top of the card or filler bracket fits around the alignment guide.
1 | alignment guide | 2 | filler bracket |
|
|
|
|
|
|
3 | alignment bar | 4 | card retention bracket |
|
|
|
|
|
|
5 | guide clamp (2) | 6 | guide notch (2) |
|
|
|
|
|
|
|
|
|
|
|
Configuring Your Computer After Removing or Installing a PCI/PCI Express Card
NOTE: For information on location of connectors, see the Quick Reference Guide. For information on installing drivers and software for your card, see the documentation that shipped with the card.
| Installed | Removed |
| ||
|
|
|
|
|
|
Sound | 1. | Enter system setup (see | 1. | Enter system setup (see |
|
Card |
| System Setup) |
| System Setup) |
|
| 2. | Go to Integrated | 2. | Go to Integrated |
|
|
| Peripherals and select |
| Peripherals and select |
|
|
| Onboard Audio |
| Onboard Audio |
|
|
| Controller, and then |
| Controller, and then |
|
|
| change the setting to |
| change the setting to |
|
|
| Disabled. |
| Enabled. |
|
| 3. | Connect the external | 3. | Connect the external |
|
|
| audio devices to the |
| audio devices to the |
|
|
| sound card's connectors. |
| computer's back panel |
|
|
|
|
| connectors. |
|
|
|
|
|
|
|
Network | 1. | Enter system setup (see | 1. | Enter system setup (see |
|
Card |
| System Setup) |
| System Setup) |
|
| 2. | Go to Integrated | 2. | Go to Integrated |
|
|
| Peripherals and select |
| Peripherals and select |
|
|
| Onboard LAN Controller, |
| Onboard LAN Controller, |
|
|
| and then change the |
| and then change the |
|
|
| setting to Disabled. |
| setting to Enabled. |
|
| 3. | Connect the network | 3. | Connect the network |
|
|
| cable to the network |
| cable to the integrated |
|
|
| card's connector. |
| network connector. |
|
|
|
|
|
|
|
|
|
|
|
|
|