Dell™ Latitude™ E6400 XFR Service Manual
1 | M2.5 x |
3 | 1394 connector |
NOTE: Smartcard assembly removed to clarify screw locations and pinpoint system board connectors. The smartcard assembly should not be removed for system board or base assembly replacement.
15.Lift the
16.Remove the gasket from the
17.Slide the system board to the right to disengage it from the chassis.
18.Disconnect the DC cable, which is connected to the bottom of the system board.
19.Lift the system board out of the base assembly.
20.Remove the card cage (see Removing the Card Cage).
2
7
1
3
4
5
6
1 | JSC1 | Smartcard connector | 5 | JBIO1 | BIO reader connector |
2 | JTP1 | Touchpad connector | 6 | J1394 | 1394 cable connector |
3 | JSNIF1 | 7 |
| ||
4 | JSPK1 | Speaker connector |
|
|
|
26.2 Replacing the System Board Assembly
CAUTION: Before you begin any of the procedures in this section, follow the safety
Page 54