Removing the Handle
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.hard drive
c.bottom cover
3.Perform the following steps to remove the handle:
a.Remove the front screws. [1]
b.Remove the screws that secure the handle to the computer. [1]
c.Lift and remove the handle from the computer. [2]
Installing the Handle
1.Place the handle and align it to its position on the computer.
2.Install the screws that secure the handle to the computer.
3.Install the front screws.
4.Install:
a.bottom cover
b.hard drive
c.battery
5.Follow the procedures in After Working Inside Your Computer.
15