Installing the Docking Board
1.Connect the docking board connector cable to the system board.
2.Align the docking board in its position on the system board and install the screws that secure it.
3.Route the docking board antenna cables through the routing channels.
4.Connect the antenna cables to their corresponding location on the docking board.
5.Install:
a.bottom cover
b.battery
6.Follow the procedures in After Working Inside Your Computer.
Removing the Memory Module
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.bottom cover
3.Pry the securing clips away from the memory module until it pops up. Remove the memory module from its connector on the system board.
Installing the Memory Module
1.Insert the memory module into the memory socket.
2.Align the keyed notch on the memory module to the memory socket.
3.Press the memory module down until it clicks into place.
4.Install:
a.bottom cover
b.battery
5.Follow the procedures in After Working Inside Your Computer.
18