Dell P45G owner manual SATA-0

Page 57

Option

Description

 

 

Drives

Allows you to configure the SATA drives on board. All drives are enabled

 

by default. The options are:

 

SATA-0

 

SATA-1

 

SATA-2

 

SATA-3

SMART Reporting

This field controls whether hard drive errors for integrated drives are

 

reported during system startup. This technology is part of the SMART

 

(Self Monitoring Analysis and Reporting Technology) specification. This

 

option is disabled by default.

 

Enable SMART Reporting

USB Configuration

This field configures the integrated USB controller. If Boot Support is

 

enabled, the system is allowed to boot any type of USB Mass Storage

 

Devices (HDD, memory key, floppy).

 

If USB port is enabled, device attached to this port is enabled and

 

available for OS.

 

If USB port is disabled, the OS cannot see any device attached to this

 

port.

 

• Enable USB Boot Support

 

• Enable External USB Ports

 

Enable USB3.0 Controller

 

• Disable Docking Station Devices except video

 

 

NOTE: USB keyboard and mouse always work in the BIOS setup

 

 

irrespective of these settings.

USB PowerShare

This option configures the USB PowerShare feature behavior. This option

 

is unchecked by default.

Audio

This field enables or disables the integrated audio controller. By default,

 

the Enable Audio option is selected.

Keyboard Illumination

This field lets you choose the operating mode of the keyboard

 

illumination feature.

 

The keyboard brightness level can be set from 25% to 100%

 

Disabled.

 

Level is 25%

 

Level is 50%

 

Level is 75%

 

• Level is 100%: This option is enabled by default

RGB Keyboard Backlight

This option configures the RGB keyboard backlight feature. There are six

 

available colors: four preset colors (white, red, green, and blue) and two

 

user configurable colors.

57

Image 57
Contents Dell Latitude 14 Rugged Extreme Page Contents System Setup Contacting Dell Before Working Inside Your Computer Working on Your ComputerTurning Off Your Computer After Working Inside Your Computer System Overview Page Opening the Press-Latch Doors Installing a QD Quick Disconnect connectorRemoving the Stylus and Tether Installing the Stylus and TetherRemoving the Battery Installing the BatteryRemoving the Hard Drive Installing the Bottom Cover Installing the Hard DriveFollow the procedures in After Working Inside Your computer Removing the Bottom CoverInstalling the Handle Battery Hard drive Bottom coverRemoving the Handle Installing the Battery Connector Removing the Battery ConnectorBattery Bottom cover Removing the Docking BoardPage Installing the Docking Board Installing the Memory ModuleRemoving the Memory Module Removing the ExpressCard Module Battery Bottom cover Hard driveInstalling the ExpressCard Module Battery Bottom cover Docking boardRemoving the Optical Drive Installing the Optical Drive Removing the Graphics Processing Unit GPU Installing the Graphics Processing Unit GPURemoving the Heatsink Installing the HeatsinkInstalling the System Fan Removing the System FanRemoving the Global Positioning System GPS Module Installing the Global Positioning System GPS Module Battery Bottom cover Hard drive ExpressCardRemoving the USH Daughter Board Installing the USH Daughter Board Battery Hard drive Bottom cover ExpressCardRemoving the LED Board Removing the Fingerprint reader Installing the LED BoardRemoving the SIM Board Installing the Fingerprint ReaderInstalling the SIM Board Installing the Coin-cell Battery Removing the Coin-cell BatteryInstalling the Wlan Card Removing the Wlan CardRemoving the Wwan Card Installing the Wwan Card Removing the System Board Page Installing the System Board Removing the Smart Card Installing the Smart CardRemoving the Palmrest Installing the Palmrest Removing the I/O Board Installing the I/O Board Removing the Keyboard Installing the Keyboard Removing the Keyboard Control Board Installing the Keyboard Control BoardRemoving the Speaker Installing the Speaker Installing the Power Connector Removing the Power ConnectorBattery Bottom cover GPU module Heatsink Removing the Display AssemblyPage Installing the Display Assembly Removing the Display Panel Installing the Display Panel Battery Display panelRemoving the Camera Installing the Camera Battery DisplayRemoving the Touch Screen Controller Board Installing the Touch Screen Controller Board Navigation Keys Boot SequenceSystem Setup Options Uefi SATA-0 Video Page KEK Power Management Page Post Behavior Wwan System and Setup Password Updating the BiosAssigning a System Password and Setup Password Page Enhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsDevice Status Lights Battery Status LightsContacting Dell