3.Perform the following steps to remove the speaker:
a.Remove the screws that secure the speaker module to the computer. [1]
b.Unroute the speaker cable from its routing channel on the chassis. [2]
c.Push the speaker module inwards and lift to remove it from the computer. [3]
Figure 29.
Installing the Speaker
1.Slide the speaker into its slot on the computer.
2.Install the screws that secure the speaker to the computer.
3.Route the speaker cable along its routing channel on the chassis.
4.Install:
a.system board
b.sim board
c.WWAN card
d.WLAN card
e.GPS module
f.ExpressCard
g.heatsink
h.GPU module
i.Memory module
j.optical drive
k.docking board
l.bottom cover
m.keyboard
n.hard drive
o.battery
5.Follow the procedures in After Working Inside Your Computer.
45