Installing the mSATA SSD Card
1.Place the mSATA SSD card in its slot in the computer.
2.Tighten the screw to secure the mSATA SSD card to the computer.
3.Install:
a)base cover
b)SD card
c)battery
4.Follow the procedures in After Working Inside Your Computer.
Removing the Memory Module
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a)battery
b)base cover
3.Pry the securing clips away from the memory module until it pops up. Remove the memory module from its connector on the system board.
Installing the Memory Module
1.Insert the memory module into the socket.
2.Press the retention clips to secure the memory module to the system board.
3.Install:
a)base cover
b)battery
4.Follow the procedures in After Working Inside Your Computer.
Removing the Coin-Cell Battery
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a)battery
b)base cover
3.Slide the
20