Dell E7440 Option Description, Smart Reporting, USB Configuration, USB PowerShare, Audio

Page 48

Option

Description

 

 

 

 

SATA-3

 

Default Setting: All drives are enabled.

SMART Reporting

This field controls if the hard drive errors for

 

the integrated drives are reported during

 

system startup. This technology is part of the

 

SMART (Self Monitoring Analysis and

 

Reporting Technology) specification.

 

Enable SMART Reporting - This option is

 

 

disabled by default.

USB Configuration

Allows you to define the USB configuration.

 

The options are:

 

Enable Boot Support

 

• Enable External USB Port

 

Enable USB3.0 Controller

 

Default Setting: all the options are enabled.

USB PowerShare

Allows you to configure the behavior of the

 

USB PowerShare feature. The option is

 

disabled by default.

 

Enable USB PowerShare

Audio

Allows you to enables or disables the

 

integrated audio controller.

 

Enable AudioThis option is enabled by

 

 

default.

Keyboard Illumination

Allows you to choose the operating mode of

 

the keyboard illumination feature. The options

 

are:

 

 

Disabled (Default Setting)

 

Level is 25%

 

Level is 50%

 

Level is 75%

 

Level is 100%

Unobtrusive Mode

Allows you to set the mode that will turn off all

 

light and sound emissions from the system.

 

The option is disabled by default.

 

Enable Unobtrusive Mode

Miscellaneous Devices

Allows you enable or disable the various on

 

board devices. The options are:

 

Enable Microphone

 

• Enable Hard Drive Free Fall Protection

 

Enable Camera

48

Image 48
Contents Regulatory Model P40G Regulatory Type P40G001 Dell Inc. All Rights Reserved Contents Docking Port Information System Setup DiagnosticsSpecifications Contacting Dell Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer Click Shut DownAfter Working Inside Your Computer Page Recommended Tools System OverviewRemoving the SD Card Installing the SD Card Removing the BatteryInstalling the Battery Removing the Base CoverLift the base cover to remove it from the computer Installing the Base Cover Removing the Hard DrivePage Installing the Hard Drive Installing the Keyboard TrimRemoving the Keyboard Trim Removing the Keyboard Installing the Keyboard Installing the Wlan Card Removing the Wlan CardRemoving the mSATA SSD Card Installing the mSATA SSD Card Installing the Memory ModuleRemoving the Coin-Cell Battery Removing the Memory ModuleInstalling the Coin-Cell Battery Removing the PalmrestPage Lift up the palmrest away from the computer Installing the Palmrest Removing the Speakers Installing the Speakers Removing the Display-Hinge CoverInstalling the Display-Hinge Cover Removing the Display AssemblyPage Unroute the cables from the slot Page Page Installing the Display Assembly Removing the System FanInstalling the System Fan Removing the HeatsinkInstalling the Heatsink Removing the System BoardPage Remove the system board from the computer Installing the System Board Removing the Power Connector Installing the Power ConnectorRemoving the I/O Board Installing the I/O Board Installing the Display Bezel Removing the Display BezelRemoving the Display Panel Installing the Display Panel Removing the CameraInstalling the Camera Docking Port Information Page Boot Sequence Navigation KeysKeys Navigation System Setup Options Option Description Date/Time Option Description Integrated NICParallel Port Serial PortUSB Configuration USB PowerShareUnobtrusive Mode Option DescriptionOption Description Admin Password System PasswordInternal HDD-1 Password Strong PasswordOption Description Non-Admin Setup Changes Default Setting Enable CPU XD SupportOrom Keyboard Access Admin Setup LockoutDefault Setting Enable Intel SpeedStep Default Setting Enable Intel TurboBoostOption Description Multi Core Support Intel SpeedStepWireless Radio Control Enable Peak Shift DisabledAdvanced Battery Charge ConfigurationOption Description Primary Battery Configuration Smart ConnectionDisabledTouchpad/PS-2 Mouse Default Setting Numlock EnableExtended Bios Post Time Option Description Wireless SwitchWireless Device Enable Updating the Bios System and Setup Password ComputerPage Page Enhanced Pre-Boot System Assessment ePSA Diagnostics Device Status LightsBattery Status Lights Storage LED Power LED Wireless LED Fault DescriptionAlternately Feature Specification Lynx Point-LP LatitudeFeatures Specification UMAFeature Specification Latitude Axis 60.8 mm 47 mm Feature Page Contacting Dell
Related manuals
Manual 71 pages 55.65 Kb