Table 8. Power Management
Option | Description | |
|
| |
AC Behavior | Allows the computer to | |
| option is disabled. | |
| • | Wake on AC |
Auto On Time | Allows you to set the time at which the computer must turn on automatically. The | |
| options are: | |
| • | Disabled (Default Setting) |
| • | Every Day |
| • | Weekdays |
| • | Select Days |
USB Wake Support | Allows you to enable the USB devices to wake the computer from standby mode. | |
| The option is disabled | |
| • Enable USB Wake Support | |
Wireless Radio Control | Allows you to control the WLAN and WWAN radio. The options are: | |
| • | Control WLAN radio |
| • | Control WWAN radio |
| Default Setting: both the options are disabled. | |
Wake on LAN/WLAN | This option allows the computer to power up from the off state when triggered by a | |
| special LAN signal. | |
| and must be enabled in the operating system. This feature only works when the | |
| computer is connected to AC power supply. | |
| • Disabled - Does not allow the system to power on by special LAN signals when | |
|
| it receives a |
| • LAN Only - Allows the system to be powered on by special LAN signals. | |
| • | WLAN Only |
| • | LAN or WLAN |
| • LAN with PXE Boot | |
Block Sleep | Allows you to block the computer from entering into the sleep state. Option is | |
| disabled by default. | |
| • | Block Sleep (S3) |
Peak Shift | Peak Shift can be used to minimize AC consumption during peak powers times of | |
| day. Set the start and end time to run in Peak Shift mode. | |
| • Enable Peak Shift (Disabled) | |
Advanced Battery Charge | Allows batteries in the system in Advanced Battery Charge Mode to maximize | |
Configuration | battery health. This uses standard charging algorithm and other techniques during | |
|
• Enable Advanced Battery Charge Mode(Disabled)
52