Dell E7440 owner manual Installing the Display Panel, Removing the Camera

Page 41

b)Disconnect the LVDS cable from the display panel [2].

c)Remove the display panel from the display assembly [3].

Installing the Display Panel

1.Connect the display cable (LVDS cable) to its connector on the display panel.

2.Place the display panel to its original position on the display assembly.

3.Tighten the screws to secure the display panel to the display assembly.

4.Install:

a)display bezel

b)battery

5.Follow the procedures in After Working Inside Your Computer.

Removing the Camera

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a)battery

b)display bezel

c)display assembly

3.Disconnect the camera cable from the module. Lift and remove the camera from the display assembly.

41

Image 41

Contents Regulatory Model P40G Regulatory Type P40G001 Dell Inc. All Rights Reserved Contents Specifications Contacting Dell Docking Port Information System SetupDiagnostics Before Working Inside Your Computer Working on Your ComputerClick Shut Down Turning Off Your ComputerAfter Working Inside Your Computer Page System Overview Recommended ToolsRemoving the SD Card Removing the Battery Installing the SD CardRemoving the Base Cover Installing the BatteryLift the base cover to remove it from the computer Removing the Hard Drive Installing the Base CoverPage Removing the Keyboard Trim Installing the Hard DriveInstalling the Keyboard Trim Removing the Keyboard Installing the Keyboard Removing the mSATA SSD Card Installing the Wlan CardRemoving the Wlan Card Installing the Memory Module Installing the mSATA SSD CardRemoving the Coin-Cell Battery Removing the Memory ModuleRemoving the Palmrest Installing the Coin-Cell BatteryPage Lift up the palmrest away from the computer Installing the Palmrest Removing the Speakers Removing the Display-Hinge Cover Installing the SpeakersRemoving the Display Assembly Installing the Display-Hinge CoverPage Unroute the cables from the slot Page Page Removing the System Fan Installing the Display AssemblyRemoving the Heatsink Installing the System FanRemoving the System Board Installing the HeatsinkPage Remove the system board from the computer Installing the System Board Removing the I/O Board Removing the Power Connector Installing the Power Connector Installing the I/O Board Removing the Display Panel Installing the Display BezelRemoving the Display Bezel Removing the Camera Installing the Display PanelInstalling the Camera Docking Port Information Page Keys Navigation Boot SequenceNavigation Keys System Setup Options Option Description Integrated NIC Option Description Date/TimeParallel Port Serial PortUSB PowerShare USB ConfigurationUnobtrusive Mode Option DescriptionSystem Password Option Description Admin PasswordInternal HDD-1 Password Strong PasswordDefault Setting Enable CPU XD Support Option Description Non-Admin Setup ChangesOrom Keyboard Access Admin Setup LockoutDefault Setting Enable Intel TurboBoost Default Setting Enable Intel SpeedStepOption Description Multi Core Support Intel SpeedStepEnable Peak Shift Disabled Wireless Radio ControlAdvanced Battery Charge ConfigurationSmart ConnectionDisabled Option Description Primary Battery ConfigurationTouchpad/PS-2 Mouse Default Setting Numlock EnableWireless Device Enable Extended Bios Post TimeOption Description Wireless Switch Updating the Bios Computer System and Setup PasswordPage Page Device Status Lights Enhanced Pre-Boot System Assessment ePSA DiagnosticsAlternately Battery Status LightsStorage LED Power LED Wireless LED Fault Description Lynx Point-LP Latitude Feature SpecificationUMA Features SpecificationFeature Specification Latitude Axis 60.8 mm 47 mm Feature Page Contacting Dell

Related manuals

Manual 71 pages 55.65 Kb