Dell LM P-133ST manual Memory Module Removal

Memory Module

.

MM1

cover

memory module (2)

retainer clip

MM2	(screws MM1 and
	MM2 are 3.5 mm)

3.5 mm

Figure 4-17. Memory Module Removal

To remove a memory module, follow these steps:

1.Turn the computer over, and remove the two memory-module cover screws.

2.Remove the memory module cover.

Grasp the two memory-module retainer clips and release the memory mod- ule. Gently rotate the memory module toward you, and then pull straight up on the module, disconnecting the module from the connector on the main board assembly.

To reinstall a memory module, both memory modules must be a matched pair, both slots must be filled, and both slots must have the same memory capacity. The following combinations are possible:

•	16	MB — Install two 4-MB memor	y modules.
•	24	MB — Install two 8-MB memor	y modules.
•	40	MB — Install two 16-MB memor	y modules.

4-22 Dell Latitude LM Systems Service Manual