Dell LM P-133ST manual Front Bezel, Remove the LCD assembly

Front Bezel

H6

bezel screw cover (2)

H7

(screws H6 and H7 are 4.5 mm)

front bezel

4.5 mm hidden tabs

NOTE: This figure shows the STN LCD assembly, which has the same front bezel as the TFT LCD assembly.

Figure 4-19. Front Bezel Removal

To remove the front bezel, follow these steps:

1.Remove the LCD assembly.

See the previous section, “LCD Assembly.”

2.With the front facing you, open the computer

3.Lay the LCD assembly back on a book or something similar to prop the assembly.

4.Use a scribe to pry the front-bezel screw covers out of the screw holes in the bezel.

5.Remove front bezel screws H6 and H7.

6.Separate the front bezel from the back bezel.

Insert your fingertips in the crevice between the front and back bezel, and lift up on the front bezel to release the hidden tabs spaced around the sides.

When replacing the front bezel, orient the bezel in its original position on the assembly and press firmly near each tab until the bezel snaps into place.

4-24 Dell Latitude LM Systems Service Manual