Inverter Board
power/ suspend indicator
H16
H15
(screws H15 and H16 are 3 mm)
3 mm
.
inverter board
Figure 4-21. Inverter Board Removal
To remove the inverter board, follow these steps:
1.Remove the front bezel.
See “Front Bezel” found earlier in this section.
2.Remove the LCD panel.
See the previous subsection, “LCD Panel.”
3.Disconnect the power/suspend indicator connector.
4.Remove inverter board screws H15 and H16.
5.Remove the inverter board from the back bezel.
Microphone
The microphone cannot be removed separately; it is part of the inverter board.