Audio Board
audio board
audio cable
plastic holder
audio board |
|
connector | main board |
Figure 4-35. Audio Board Removal
To remove the audio board, follow these steps:
1.Open the cover.
2.Remove the top assembly.
See “Top Assembly” found earlier in this chapter.
3.Remove the cable from the audio board.
4.Remove the audio board from the main board.
The audio board is held in place on the main board by a connector on one side of the audio board. On the other side of the main board, the audio board is held in place by a clasp and two projections. The clasp and projections are on a plastic holder. Lift out the plastic holder.