Speakers
speaker (2)
top assembly
plastic housing (2)
| S22 |
| (screws S22 and S23 | |
(screws S5 and S6 | S5 |
| ||
| are 6 mm) | |||
are 3 mm) |
|
| ||
|
|
| ||
3 mm | speaker | status display S6 | 6 mm | |
connector | ||||
| board | S23 |
Figure 4-27. Speakers Removal
To remove the speakers, follow these steps:
1.Remove the top assembly.
See the previous section, “Top Assembly.”
2.Remove speaker screws S5, S6, S22, and S23. Remove the plastic housing holding the speakers.
3.Disconnect the speaker connectors from both ends of the status display board.
4.Remove the pieces of plastic tape holding the connector wires to the top assembly.
5.Remove the speakers from the top assembly.