Dell D505 manual Removing a Battery

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Removing a Battery

For more information about removing the second battery, see "Using the Module Bay" in your online User’s Guide.

CAUTION: Before performing these procedures, turn off the computer, disconnect it from the electrical outlet, and disconnect the modem from the telephone wall jack.

NOTICE: If you choose to replace the battery with the computer in standby mode, you have up to

90 seconds to complete the battery replacement before the computer shuts down and loses any unsaved data.

1Ensure that the computer is turned off, disconnected from an electrical outlet, and disconnected from the telephone wall jack.

2If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.

3Slide and hold the battery-bay latch release on the bottom of the computer, and then remove the battery from the bay.

18

System Information Guide