Dell 858-BBBE, E2014T manual Attaching the Stand, 18  Setting Up the Monitor

CAUTION: Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.

•Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.

•If you notice white powder when you unpack your monitor, wipe it off with a soft and clean cloth.

•Handle your monitor with care to avoid scratches and scuff marks.

•To help maintain the best image quality on your monitor, use a dynamically

changing screen saver and turn off your monitor when not in use.

Setting Up the Monitor

Attaching the Stand

NOTE: The stand is detached from monitor when it is shipped from the factory.

NOTE: If you purchased a different stand for your monitor, see the documentation for that stand for setup instructions.

To attach the monitor stand:

1.Place the monitor on a flat surface.

2.Insert the two tabs on the upper part of the stand to the groove in the back of the monitor.

3.Press-down on the stand till it snaps into its place.

18        Setting Up the Monitor