Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: Any changes you make using the OSD menu are automatically saved if you move to another OSD menu, exit the OSD menu, or wait for the OSD menu to disappear.
1.Press the 
button to launch the OSD menu and display the main menu.
NOTE: Auto Adjust feature is only available when you use the VGA connector.
2.Press the 
and 
buttons to move between the OSD menu options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor.
3.Press the 
or 
button once to activate the highlighted option.
4.Press the 
and 
buttons to select the desired parameter.
5.Press 
to enter the slide bar and then use the 
or 
button, according to the indicators on the menu, to make your changes.
6.Press the 
button once to return to the main menu to select another option or press the 
button two or three times to exit from the OSD menu.