Cobalt Networks 8321(-C), 8310(-C) Cooling Fan Functions and User Controls, Frame Door Features

Page 27

1.Open the CFM-8310 package and remove the components. Verify that all necessary components are included.

Fan PCB 8310A-016

Fan Filter S985-006

8 nuts 650-007

8 washers 960-025

MFC-8310(-N) Frame Controller Card

2.Turn frame power off.

3.Open the frame door.

4.Carefully remove the door from the frame by unscrewing the two screws that attach the door to the extender arms.

5.Place the frame door inside up on a clean antistatic workspace.

6.Insert the Fan Filter with the panhandle over the smaller fan vents and the cut corner adjacent to the LED pipes already on the door. Gently push the filter down so the mounting bolts pass through cleanly.

7.Place a washer on each of the 8 mounting bolts.

8.Align the Fan PCB with the fans up so the LED pipes pass through their board holes.

9.Ensure the Alarm Mute button clears its door hole and that the Fault and Fan Fail LEDs clear their door holes while you slowly press the Fan PCB down onto the 8 mounting bolts. See Figure 11 for details on these item locations.

10.On the frame door, check that the Alarm Mute button pushes in and out without binding.

11.Tighten the 8 nuts until they just make contact with the rubber grommets on the 8310A-016 Fan PCB. Do not over tighten.

12.Reconnect the door to the frame extender arms with the two screws from step 4.

This completes the procedure to install the Fan Board component of the CFM-8310 module. Next you will learn about the CFM-8310 functions and user controls.

Cooling Fan Functions and User Controls

The CFM-8310 provides LED and Alarm switching controls to the front edge of the 8310 frame door. Refer to Table 4 for details on LED functions for the MFC-8310 controller card.

Figure 10. Frame Door Features

8310/8321 User Manual (V 1.0)

Page 27

Image 27
Contents Cobalt Digital Inc OpenGearTM 2RU Frame Power Supply PS-8300Trademarks CopyrightSymbol Meanings Important Regulatory and Safety NoticesImportant Safety Instructions Product Power Cord Requirements EMC NoticesUS FCC Part Environmental Information Maintenance/User Serviceable PartsContents Service Information Ordering InformationContact Us Overview IntroductionThis Chapter Word of ThanksRobust Power Supplies FeaturesDocumentation Terms Static Discharge Installation and SetupUnpacking Hazardous Voltages Installing the FramePower Supply PS-8300 and Power Cable Installing the Frame Power SupplyColor Display and Description Fault ReportingImproving Performance Ventilation and CoolingWithout Fan Kit Fan Kit InstalledPower Cable Connection Cable ConnectionsBNC Rear I/O Module Rear I/O ModulesSmpte Alarm Connector Rear I/O Module InstallationOpenBUS Connector Ethernet ConnectorDual Reference Connectors Smpte 269M Fault Reporting Option Details Frame ConnectionsTechnical Specifications SpecificationsSmpte Fault ReportingEnvironmental Important Notes Frame Features Cooling Features Installing the Cooling Fan ModuleFan Board Installation Instructions Cooling Fan Functions and User Controls Frame Door FeaturesFunctions of the Controller Card Installing the Controller CardMFC-8310 LEDs MFC-8310 Alarm Configuration JumperAlarm Mute Button Controls and LEDs for the Controller CardMFC-8310 Controller Card LED Descriptions Remote Control Networking Features Installing the Network Controller CardEthernet Setup Controls and LEDs for the Network Controller Card Functions of the Network Controller CardButtons on the MFC-8310-N DIP Switches on the MFC-8310-NMFC-8310-N LEDs Reset ButtonDashBoard and DashBoard Lite Control System Software Snmp Monitoring and ControlColor Location Display and Description Configuring Snmp Enabling SnmpOperating Tip Rear Support Bars and Brackets Installing the Rear Support Bars and Brackets8321 20-Slot Frame Setup Rear Modules for the 8321 Series Frames Split Rear Module Cooling Features Specifications for the 8321 Series Frames Service Information Troubleshooting ChecklistFrame Controller Alarm Mute/Bootload Button Page Cobalt Digital Inc. Limited Warranty Warranty and Repair PolicyOrdering Information Standard EquipmentOptional Equipment Page Contact Us Contact Cobalt Digital IncVisit us at the Cobalt Digital Inc. website

8321(-C), 8310(-C) specifications

Cobalt Networks was known for its pioneering role in the development of high-performance server appliances, particularly with its 8300 series, which includes the 8310(-C) and 8321(-C) models. These devices are recognized for their reliability, scalability, and efficiency, making them ideal solutions for web hosting, content delivery, and database management.

The Cobalt 8310(-C) model primarily targets small to medium-sized businesses looking for a cost-effective yet powerful server solution. It features a robust hardware design, powered by a dedicated processor that ensures speedy performance and low latency for applications. With its capacity to handle multiple simultaneous connections, the 8310(-C) is well-suited for web applications and e-commerce platforms. Its compact form factor allows for easy installation in server racks, contributing to efficient space utilization in data centers.

On the other hand, the Cobalt 8321(-C) is designed for larger enterprises requiring enhanced performance and greater scalability. This model includes a multicore processor and offers higher RAM and storage options, allowing businesses to support more demanding applications and larger databases. The 8321(-C) is particularly beneficial for organizations that anticipate growth, as it can be easily scaled up with additional resources, ensuring that service quality remains consistent even during peak loads.

Both models share several key features that underscore Cobalt Networks' commitment to performance and reliability. They incorporate advanced cooling technologies to maintain optimal operating temperatures, prolonging hardware lifespan and enhancing reliability. Additionally, both models support a variety of operating systems and virtualization technologies, providing the flexibility needed to run diverse applications.

Security is another critical characteristic of the 8310(-C) and 8321(-C). They come equipped with robust security protocols, including firewall and intrusion detection systems, ensuring that sensitive data is protected from unauthorized access and cyber threats.

In summary, the Cobalt Networks 8310(-C) and 8321(-C) models stand out due to their performance, scalability, and security features. These servers are suited for businesses of varying sizes, supporting a range of applications while ensuring reliability and efficiency in demanding environments. As organizations continue to embrace digital transformation, these models remain relevant due to their robust technologies and capabilities.