Cobalt Networks 8310(-C) Installing the Controller Card, Functions of the Controller Card

Page 28

Next you will install either an MFC-8310 or an MFC-8310-N controller card. Refer to the appropriate section for installation instructions for your specific controller card.

Installing the Controller Card

Use the following procedure to install the MFC-8310 controller card component of the CFM-8310:

Figure 11. MFC-8310 Fan Controller Card and Unscrewed Retaining Screw

1.With the frame door open, unscrew the MFC-8310 Card Retaining Screw (Part No. 850-040) enough to eliminate any protrusion into the card guide slot on the right of the screw. If necessary, remove any cards from the frame that would interfere with easy access and lines of sight.

2.Insert the MFC-8310 frame controller card, with the component side out as shown in Figure 11, into the card guides along the dividing wall between slot 10 and the PS- 8300 section of the frame, ensuring the card does not touch the Card Retaining Screw.

3.Slide the card in the slot until firmly seated and so the Card Retaining Screw hole on the bottom front edge aligns with the mounted nut beside the bottom guide slot.

4.Tighten the Card Retaining Screw through the mounted nut and the MFC-8310 Card Retaining Screw hole, to ensure the card does not move from the slot.

5.Close the door, power up the frame, and check the operation of the fans. If the fans do not operate, verify that the MFC-8310 is seated properly in the frame backplane and is aligned to the Fan PCB when the door is closed.

This completes the installation of the MFC-8310 controller card for the CFM-8310 Cooling Fan Module. Next you will learn the general functions and controls available on the MFC-8310 controller card.

Functions of the Controller Card

The MFC-8310 controller card component of the CFM-8310 performs several functions:

Monitors frame power usage and sets the fan speed accordingly (higher power consumption requires higher fan speed for adequate cooling). The fans always run at maximum speed for 5

Page 28

8310/8321 User Manual (V 1.0)

Image 28
Contents OpenGearTM 2RU Frame Power Supply PS-8300 Cobalt Digital IncCopyright TrademarksImportant Regulatory and Safety Notices Symbol MeaningsImportant Safety Instructions EMC Notices Product Power Cord RequirementsUS FCC Part Maintenance/User Serviceable Parts Environmental InformationContents Ordering Information Service InformationContact Us Introduction This ChapterWord of Thanks OverviewFeatures Robust Power SuppliesDocumentation Terms Installation and Setup Static DischargeUnpacking Installing the Frame Power Supply PS-8300 and Power CableInstalling the Frame Power Supply Hazardous VoltagesFault Reporting Improving PerformanceVentilation and Cooling Color Display and DescriptionFan Kit Installed Power Cable ConnectionCable Connections Without Fan KitRear I/O Modules BNC Rear I/O ModuleRear I/O Module Installation Smpte Alarm ConnectorEthernet Connector OpenBUS ConnectorDual Reference Connectors Smpte 269M Fault Reporting Option Frame Connections DetailsSpecifications Technical SpecificationsReporting Smpte FaultEnvironmental Important Notes Frame Features Installing the Cooling Fan Module Cooling FeaturesFan Board Installation Instructions Frame Door Features Cooling Fan Functions and User ControlsInstalling the Controller Card Functions of the Controller CardMFC-8310 Alarm Configuration Jumper Alarm Mute ButtonControls and LEDs for the Controller Card MFC-8310 LEDsMFC-8310 Controller Card LED Descriptions Installing the Network Controller Card Remote Control Networking FeaturesEthernet Setup Functions of the Network Controller Card Controls and LEDs for the Network Controller CardDIP Switches on the MFC-8310-N Buttons on the MFC-8310-NReset Button MFC-8310-N LEDsSnmp Monitoring and Control DashBoard and DashBoard Lite Control System SoftwareColor Location Display and Description Enabling Snmp Configuring SnmpOperating Tip Installing the Rear Support Bars and Brackets Rear Support Bars and Brackets8321 20-Slot Frame Setup Rear Modules for the 8321 Series Frames Split Rear Module Cooling Features Specifications for the 8321 Series Frames Troubleshooting Checklist Service InformationFrame Controller Alarm Mute/Bootload Button Page Warranty and Repair Policy Cobalt Digital Inc. Limited WarrantyStandard Equipment Ordering InformationOptional Equipment Page Contact Cobalt Digital Inc Contact UsVisit us at the Cobalt Digital Inc. website

8321(-C), 8310(-C) specifications

Cobalt Networks was known for its pioneering role in the development of high-performance server appliances, particularly with its 8300 series, which includes the 8310(-C) and 8321(-C) models. These devices are recognized for their reliability, scalability, and efficiency, making them ideal solutions for web hosting, content delivery, and database management.

The Cobalt 8310(-C) model primarily targets small to medium-sized businesses looking for a cost-effective yet powerful server solution. It features a robust hardware design, powered by a dedicated processor that ensures speedy performance and low latency for applications. With its capacity to handle multiple simultaneous connections, the 8310(-C) is well-suited for web applications and e-commerce platforms. Its compact form factor allows for easy installation in server racks, contributing to efficient space utilization in data centers.

On the other hand, the Cobalt 8321(-C) is designed for larger enterprises requiring enhanced performance and greater scalability. This model includes a multicore processor and offers higher RAM and storage options, allowing businesses to support more demanding applications and larger databases. The 8321(-C) is particularly beneficial for organizations that anticipate growth, as it can be easily scaled up with additional resources, ensuring that service quality remains consistent even during peak loads.

Both models share several key features that underscore Cobalt Networks' commitment to performance and reliability. They incorporate advanced cooling technologies to maintain optimal operating temperatures, prolonging hardware lifespan and enhancing reliability. Additionally, both models support a variety of operating systems and virtualization technologies, providing the flexibility needed to run diverse applications.

Security is another critical characteristic of the 8310(-C) and 8321(-C). They come equipped with robust security protocols, including firewall and intrusion detection systems, ensuring that sensitive data is protected from unauthorized access and cyber threats.

In summary, the Cobalt Networks 8310(-C) and 8321(-C) models stand out due to their performance, scalability, and security features. These servers are suited for businesses of varying sizes, supporting a range of applications while ensuring reliability and efficiency in demanding environments. As organizations continue to embrace digital transformation, these models remain relevant due to their robust technologies and capabilities.