w w w . d e l l . c o m s u p p o r t . d e l l . c o m

2Pull the device by the latch release to remove the device from the module bay.

3Insert the new device into the bay, push the device until you feel a click, and push the device latch release in so that it is flush with the computer.

If the Device Screw Is Installed

1Save and close any open files, exit any open programs, and then shut down the computer.

2If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.

NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.

3Close the display and turn the computer over.

56

Using Batteries and Module Bay Devices

Page 56
Image 56
Dell 600m owner manual If the Device Screw Is Installed