w w w . d e l l . c o m s u p p o r t . d e l l . c o m

NOTE: If the device screw is not installed, you can remove and install devices while the computer is running and connected to a docking device (docked).

NOTE: You do not need to install the device screw unless you want to secure the module inside the computer for security purposes.

NOTICE: Insert devices into the module bay before you dock and turn on the computer.

7Insert the new device into the bay, push the device until you feel a click, and push the device latch release in so that it is flush with the computer.

8Replace the device screw.

9Turn on the computer.

Removing and Installing Devices While the Computer Is Running

Your computer ships with an optical drive installed in the module bay. However, the device screw is not installed in the optical drive but packaged separately. When you install your device in the module bay, you can install the device screw.

If the Device Screw Is Not Installed

1Double-click the Safely Remove Hardware icon on the taskbar.

2Click Stop and wait for the operating system to confirm that the device has stopped.

3Click the device you want to eject.

NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.

58

Using Batteries and Module Bay Devices

Page 58
Image 58
Dell 600m owner manual If the Device Screw Is Not Installed