w w w . d e l l . c o m s u p p o r t . d e l l . c o m

6Plug the two RCA connectors on the other end of the audio cable into the audio input connectors on your television or audio device.

NOTE: Ensure that you properly connect the television before you enable the display settings.

NOTE: Various programs access the hardware in different ways. You may or may not need to click the primary button for operations other than playing DVDs.

Enabling the Display Settings for a Television

ATI Video Controller

1To open the Control Panel window, click the Start button and then click the Control Panel icon.

2Double-click the Display icon, click the Settings tab, and then click

Advanced.

3Click the Displays tab.

4Click the upper-left corner of the TV button to enable the television.

5To play a DVD on the television, click the small "primary" button (resembles a bull’s-eye) at the bottom-left under the TV picture.

6Click Apply.

7Click Yes to keep the new settings.

8Click OK.

DVD video is visible only on the display that is set to primary. While the DVD is playing, the DVD player window on your computer display is blank or (if the DVD player window is set to full-screen mode) the entire computer display screen is blank.

82

Using CDs, DVDs, and Other Multimedia

Page 82
Image 82
Dell 600m owner manual Enabling the Display Settings for a Television