Adding and Replacing Parts 123
11 Lower the Mini PCI card toward the inner tabs to approximately a
20-degree angle.
12 Continue lowering the Mini PCI card until it snaps into the inner tabs
of the connector.
13 Replace the cover.
Replacing the Hard Drive
NOTICE: To prevent data loss, shut down your computer (see "Turning Off Your
Computer" on page 43) before removing the hard drive. Do not remove the hard
drive while the computer is on, in standby mode, or in hibernate mode.
NOTICE: Hard drives are extremely fragile; even a slight bump can damage
the drive.
CAUTION: If you remove the hard drive from the computer when
the drive is hot, do not touch the metal housing of the hard drive.
CAUTION: Before working inside your computer, read the safety
instructions at the front of this guide (see page 11).
antenna connectors on card (2)
antenna cables (2)