w w w . d e l l . c o m s u p p o r t . d e l l . c o m

NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell.

NOTE: You need the Operating System CD to install the Microsoft® Windows® operating system. You also need the Drivers and Utilities CD for your computer to install the drivers and utilities on the new hard drive.

1Ensure that the work surface is flat and clean to prevent scratching the computer cover.

2Save and close any open files, exit any open programs, and shut down the computer (see "Turning Off Your Computer" on page 43).

3If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.

4Remove all installed batteries, and disconnect the AC adapter cable and any external devices from the computer. Wait 5 seconds before proceeding.

5Ground yourself by touching a metal connector on the back of the computer, and continue to do so periodically during this procedure.

6Turn the computer over. Use a small screwdriver to loosen the M2.5 x 5-mm screw.

M2.5 x 5-mm screw

7Turn the computer over so that it is upright.

124

Adding and Replacing Parts

Page 124
Image 124
Dell 600m owner manual M2.5 x 5-mm screw, Adding and Replacing Parts