NOT ENOUGH MEMOR Y OR RESOURCES. EXIT SOME PROGRAMS AND

TR Y AGAIN You have too many programs open. Close all windows and open the program that you want to use.

OPERATING SYSTEM NOT FOUND Contact Dell (see "Accessing Help" on page 98).

AREQUIRED .DLL FILE WAS NOT FOUND The program that you are

trying to open is missing an essential file. Remove and then reinstall the program.

1Click the Start button.

2Click Control Panel.

3Click Add or Remove Programs.

4Select the program you want to remove.

5Click Remove or Change/Remove and follow the prompts on the screen.

6See the program documentation for installation instructions.

X:\ IS NOT ACCESSIBLE. THE DEVICE IS NOT READY Insert a disk into the drive and try again.

Video and Display Problems

If the display is blank

CHECK THE LIGHT When the light is blinking, the computer has power.

If the light is blinking, the computer is in standby mode—press the power button to exit standby mode.

If the light is off, press the power button.

If the light is on, your power management settings may have caused the display to turn off. Try pressing any key or move the cursor to exit standby mode.

CHECK THE BATTER Y If you are using a battery to power your computer, the battery charge may be depleted. Connect the computer to an electrical outlet using the AC adapter, and turn on the computer.

NOTE: If you are using a program that requires a higher resolution than your computer supports, it is recommended that you attach an external monitor to your computer.

Solving Problems

99

Page 99
Image 99
Dell 600m Video and Display Problems, If the display is blank, Click Control Panel Click Add or Remove Programs