Power Consumption

Connecting Cables

Installation

CAUTION Reverse polarity connections (positive to negative) will blow internal fuses in the inverter and may permanently damage the unit. Such damage is not covered by the warranty.

CAUTION Remove any jewelry (watch, ring, etc.). Be careful not to short circuit the battery with any metallic object (wrench, etc.).

WARNING You may observe a spark when making the connection because current can flow to charge the capacitors in the inverter. Do not make this connection in the presence of flammable fumes. Explosion or fire may result. Thoroughly ventilate the battery compartment before making this connection.

10 English

Installation

Power Consumption

•

For each piece of equipment you will be operating from the inverter, you must determine the battery’s reserve capacity (how long the battery can deliver a specific amount of current — in automotive batteries, usually 25 amperes) or ampere-hour capacity (a measure of how many amperes a battery can deliver for a specified length of time).

Example – Reserve capacity: a battery with a reserve capacity of 180 minutes can deliver 25 amperes for 180 minutes before it is completely discharged.

Example – Ampere-hour capacity: a battery with an ampere-hour capacity of 100 ampere-hours can deliver 5 amperes for 20 hours before it is completely discharged.

To Determine the Battery Ampere-Hour Capacity You Require:

1.Determine how many watts each piece of equipment consumes. This can normally be found on the product label. If only the current draw is given, multiply the current draw by 115 to get the watt consumption.

2.Estimate the time (in hours) that each piece of equipment will be running between battery charging cycles.

3.Calculate the total watt-hours of energy consumption (power x operating time) using the average power consumption and the total estimated running time (in hours).

Power x Operating Time = Watt-Hours.

LaptopTV/VCR (up to 25")Blender

100 Watts x 2 hours	115 Watts x 3 hours	300 Watts x 15 minutes
= 200 Watt-Hours	= 345 Watt-Hours	= 75 Watt-Hours

4.Divide the watt-hours by ten (10) to determine how many power supply’s (12 volt) ampere-hours will be consumed.

Nothing comes close to a Cobra® 11