CNet Technology CNIG904S manual If you cant connect, Navigation & Data Input

Page 13

CNet Technology Inc

Broadband Router User Guide

If you can't connect

If the Broadband Router does not respond, check the following:

•The Broadband Router is properly installed, LAN connection is OK, and it is powered ON.

•Ensure that your PC and the Broadband Router are on the same network segment. (If you don't have a router, this must be the case.)

•If your PC is using a fixed IP Address, its IP Address must be within the range 192.168.0.2 to 192.168.0.254 to be compatible with the Broadband Router's default IP Address of 192.168.0.1. Also, the Network Mask must be set to 255.255.255.0. See Chapter 4 – PC Configuration for details on checking your PC’s TCP/IP settings.

Navigation & Data Input

•Use the menu bar on the left of the screen, and the "Back" button on your Browser, for navigation.

•Changing to another screen without clicking "Save" does NOT save any changes you may have made. You must “Save” before changing screens or your data will be ignored.

On each screen, clicking this icon will display help for that screen.

10

Image 13

Contents User’s Guide Shared Broadband Internet AccessTable of Contents Broadband Router Overview General Problems Internet AccessLAN Features Broadband Router FeaturesIntroduction Configuration & Management Internet Access FeaturesSecurity Features Advanced Internet FunctionsPackage Contents Top Mounted LEDs Physical DetailsRear Panel Restore Default IP Address and Clear Password DIP SwitchesDIP Switch Setting Description Installation Procedure InstallationChoose an Installation Site RequirementsConnect Adsl or Cable Modem Power UpCheck the LEDs Overview ConfigurationTo Do this Refer to Connecting to the Broadband Router Configuration ProgramPreparation Navigation & Data Input If you cant connectLAN Screen LAN ConfigurationData LAN Screen IP AddressDNS Domain Name Server Dhcp ServerRouting Table WAN Direct Connection WAN ConfigurationTip Data WAN Direct ConnectionButtons IP AddressData WAN PPPoE WAN PPPoEAccount OptionsWAN Status Direct Connection WAN StatusData WAN StatusStatus Data WAN Status PPPoEConnection Log Message Description Connection Log MessagesData LAN/Device Status LAN/Device StatusDevice LAN PortStatus TCP/IP Settings PC ConfigurationTo check your PCs TCP/IP Settings Using Specify an IP Address Using DhcpDNS Tab Win 95/98 Accessing AOL Internet Access ConfigurationMacintosh Configuration Using another Dhcp Server Using the Broadband Routers Dhcp ServerChapter What Dhcp DoesTo Configure your PCs to use Dhcp Using this Screen Broadband Router ConfigurationRouting Destination Routing Table DataGateway InterfaceRouting Example Router ConfigurationLocal Router Other Routers on the Local LANFor Router Bs Default Route For Router As Default RouteFor the Broadband Routers Routing Table Entry 1 SegmentWhen prompted for the password, leave the User Name blank PasswordDevice Options Remote Management NAT Network Address TranslationTo connect from a remote PC via the Internet Advanced Internet Screen Advanced InternetSpecial Internet Applications Using a Special ApplicationSpecial Applications Screen At any time, only one 1 PC can use each Special ApplicationConfiguration Data from Service Provider Remote PC Virtual ServersIP Address seen by Internet Users Types of Virtual ServersWAN IP Address Virtual Server ConfigurationType LAN IP AddressTo Modify Edit a defined Server User Defined Virtual ServersTo Delete a defined Server To List all ServersDetails Connecting to the Virtual ServersDMZ Screen Configuring the DMZEnable DMZ EnableFeature DataTo use this feature Access ControlSecurity Groups To Change Access for an Existing GroupOperations To Define a Security GroupPacket Filter Table Access Rights Internet Access for this GroupTo Add a New PC PCsTo Delete an Existing PC To Change an Existing PCs DetailsFilters TCP Filters TCP PacketsPort No UDP FiltersGeneral Problems TroubleshootingInternet Access Broadband Router Specifications