CNet Technology CNIG904S Requirements, Installation Procedure, Choose an Installation Site

Page 9

Chapter 2	2
Installation

This Chapter covers the physical installation of the Broadband Router.

Requirements

•Ethernet LAN (10/100BaseT) and the TCP/IP protocol.

•For Internet Access, a DSL or Cable modem, and an Internet Access account with an ISP.

Installation Procedure

Figure 3 Installation Diagram

1. Choose an Installation Site

Select a suitable place on the network to install the Broadband Router. Ensure the Broadband Router and the Cable/DSL modem are powered OFF.

2. Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching Hub ports (LAN ports) on the Broadband Router. Both 10BaseT and 100BaseT connections can be used simultaneously.

If required, connect the Broadband Router's "Uplink" port to a standard port on another hub. A standard LAN cable should be used.

Note: If the "Uplink" port is used, Port 4 can NOT be used.

Image 9

Contents User’s Guide Shared Broadband Internet AccessTable of Contents Broadband Router Overview General Problems Internet AccessBroadband Router Features LAN FeaturesIntroduction Configuration & Management Internet Access FeaturesSecurity Features Advanced Internet FunctionsPackage Contents Physical Details Top Mounted LEDsRear Panel DIP Switches Restore Default IP Address and Clear PasswordDIP Switch Setting Description Installation Procedure InstallationChoose an Installation Site RequirementsPower Up Connect Adsl or Cable ModemCheck the LEDs Configuration OverviewTo Do this Refer to Configuration Program Connecting to the Broadband RouterPreparation Navigation & Data Input If you cant connectLAN Screen LAN ConfigurationData LAN Screen IP AddressDhcp Server DNS Domain Name ServerRouting Table WAN Direct Connection WAN ConfigurationTip Data WAN Direct ConnectionButtons IP AddressData WAN PPPoE WAN PPPoEAccount OptionsWAN Status Direct Connection WAN StatusData WAN StatusWAN Status PPPoE Status DataConnection Log Message Description Connection Log MessagesData LAN/Device Status LAN/Device StatusDevice LAN PortStatus PC Configuration TCP/IP SettingsTo check your PCs TCP/IP Settings Using Specify an IP Address Using DhcpDNS Tab Win 95/98 Accessing AOL Internet Access ConfigurationMacintosh Configuration Using another Dhcp Server Using the Broadband Routers Dhcp ServerChapter What Dhcp DoesTo Configure your PCs to use Dhcp Broadband Router Configuration Using this ScreenRouting Destination Routing Table DataGateway InterfaceRouting Example Router ConfigurationLocal Router Other Routers on the Local LANFor Router Bs Default Route For Router As Default RouteFor the Broadband Routers Routing Table Entry 1 SegmentPassword When prompted for the password, leave the User Name blankDevice Options NAT Network Address Translation Remote ManagementTo connect from a remote PC via the Internet Advanced Internet Screen Advanced InternetSpecial Internet Applications Using a Special ApplicationSpecial Applications Screen At any time, only one 1 PC can use each Special ApplicationConfiguration Data from Service Provider Remote PC Virtual ServersIP Address seen by Internet Users Types of Virtual ServersWAN IP Address Virtual Server ConfigurationType LAN IP AddressTo Modify Edit a defined Server User Defined Virtual ServersTo Delete a defined Server To List all ServersDetails Connecting to the Virtual ServersDMZ Screen Configuring the DMZEnable DMZ EnableFeature DataTo use this feature Access ControlSecurity Groups To Change Access for an Existing GroupOperations To Define a Security GroupPacket Filter Table Access Rights Internet Access for this GroupTo Add a New PC PCsTo Delete an Existing PC To Change an Existing PCs DetailsFilters TCP Filters TCP PacketsPort No UDP FiltersGeneral Problems TroubleshootingInternet Access Broadband Router Specifications