CNet Technology CNIG904S manual Routing Table Data, Destination, Gateway, Interface, Metric

Page 32

CNet Technology Inc

Routing

Routing Table Data

An entry in the routing table is required for each LAN segment on your Network, other than the segment to which this device is attached. The data in the Routing Table is as follows.

Destination

The network address of the remote LAN segment.

IP Address

For standard class "C" LANs, the network address is the first 3 fields of

 

this Destination IP Address. The 4th (last) field can be left at 0.

Network Mask

The Network Mask used on the remote LAN segment. For class "C"

 

networks, the standard Network Mask is 255.255.255.0

 

 

Gateway

The IP Address of the Router on the LAN segment to which this device is

IP Address

attached. (NOT the router on the remote LAN segment.)

 

 

Interface

Select the appropriate interface - LAN (Internal LAN) or WAN (External

 

LAN or WAN) from the drop-down list.

 

 

Metric

The number of routers which must be traversed to reach the remote LAN

 

segment. The default value is 1.

 

 

29

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Shared Broadband Internet Access User’s GuideTable of Contents Overview General Problems Internet Access Broadband RouterIntroduction Broadband Router FeaturesLAN Features Internet Access Features Configuration & ManagementSecurity Features Advanced Internet FunctionsPackage Contents Rear Panel Physical DetailsTop Mounted LEDs DIP Switch Setting Description DIP SwitchesRestore Default IP Address and Clear Password Installation Installation ProcedureChoose an Installation Site RequirementsCheck the LEDs Power UpConnect Adsl or Cable Modem To Do this Refer to ConfigurationOverview Preparation Configuration ProgramConnecting to the Broadband Router If you cant connect Navigation & Data InputLAN Configuration LAN ScreenData LAN Screen IP AddressRouting Table Dhcp ServerDNS Domain Name Server WAN Configuration WAN Direct ConnectionTip Data WAN Direct ConnectionIP Address ButtonsWAN PPPoE Data WAN PPPoEAccount OptionsWAN Status WAN Status Direct ConnectionData WAN StatusConnection Log WAN Status PPPoEStatus Data Connection Log Messages Message DescriptionLAN/Device Status Data LAN/Device StatusDevice LAN PortStatus To check your PCs TCP/IP Settings PC ConfigurationTCP/IP Settings Using Dhcp Using Specify an IP AddressDNS Tab Win 95/98 Internet Access Configuration Accessing AOLMacintosh Configuration Using the Broadband Routers Dhcp Server Using another Dhcp ServerChapter What Dhcp DoesTo Configure your PCs to use Dhcp Routing Broadband Router ConfigurationUsing this Screen Routing Table Data DestinationGateway InterfaceRouter Configuration Routing ExampleLocal Router Other Routers on the Local LANFor Router As Default Route For Router Bs Default RouteFor the Broadband Routers Routing Table Entry 1 SegmentDevice Options PasswordWhen prompted for the password, leave the User Name blank To connect from a remote PC via the Internet NAT Network Address TranslationRemote Management Advanced Internet Advanced Internet ScreenUsing a Special Application Special Internet ApplicationsSpecial Applications Screen At any time, only one 1 PC can use each Special ApplicationConfiguration Data from Service Provider Virtual Servers Remote PCIP Address seen by Internet Users Types of Virtual ServersVirtual Server Configuration WAN IP AddressType LAN IP AddressUser Defined Virtual Servers To Modify Edit a defined ServerTo Delete a defined Server To List all ServersConnecting to the Virtual Servers DetailsConfiguring the DMZ DMZ ScreenEnable Enable DMZFeature DataAccess Control To use this featureTo Change Access for an Existing Group Security GroupsOperations To Define a Security GroupAccess Rights Internet Access for this Group Packet Filter TablePCs To Add a New PCTo Delete an Existing PC To Change an Existing PCs DetailsFilters TCP Packets TCP FiltersPort No UDP FiltersTroubleshooting General ProblemsInternet Access Specifications Broadband Router
Top Page Image Contents